1-20 of 418 Search Results for

Brass

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Image
Published: 30 September 2023
Figure 3.17: Measured and predicted strain distributions for stretch forming of a brass sheet over a spherical punch using the friction model of Wilson, et al. [ 55 ] compared to the experiments of Sun, et al. [ 64 ]. More
Image
Published: 30 September 2023
Figure 10.26: Microstructures of billets of (a) copper and (b) 70/30 brass partially extruded at 800°C. More
Image
Published: 30 September 2023
Figure 13.4: Continuous chip formation in cutting of 60/40 brass at a speed of 100 m/min. Source: P.K. Wright, University of California at Berkeley [ 36 ]. More
Image
Published: 30 September 2023
Figure 13.5: Example of BUE formation in cutting of 60/40 brass at a speed of 30 m/min Source: P.K. Wright, University of California at Berkeley [ 36 ]. More
Image
Published: 30 September 2023
Figure 13.9: Occurrence of BUE in cutting of brass (HSS tool; rake angle, 15°). More
Image
Published: 01 January 2000
Fig. 47 Layer-type dezincification of a brass pump component. The dark (red) outer layers are uniformly corroded regions surrounding the uncorroded metal (original yellow) of the brass. Source: Nalco Chemical Company More
Image
Published: 01 January 2000
Fig. 48 Layer-type dezincification of a thin brass sheet. The 0.48 mm (0.019 in.) sheet is shown in cross section. The dezincified layers converge toward the edge (left side) of the sheet. Note the porosity of the dezincified metal. Source: Nalco Chemical Company More
Image
Published: 01 January 2000
Fig. 49 A large plug of dezincified metal beneath a deposit on a brass pipe. Source: Nalco Chemical Company More
Image
Published: 01 January 2000
Fig. 50 Plug-type dezincification in an α-brass (70Cu-30Zn) exposed for 79 days in 1 N NaCl at room temperature. Note porous structure within the plug. The dark line surrounding the plug is an etching artifact. 160× More
Image
Published: 01 August 2013
Fig. 6.5 Effect of annealing temperature on cold worked (CW) brass. Note that the sharp drop in hardness associated with recrystallization occurs at lower temperatures for material that is more heavily cold worked. Source: Ref 6.1 More
Image
Published: 01 June 2008
Fig. 25.10 Annealed cartridge brass. Original magnification: 75×. Source: Ref 4 More
Image
Published: 01 June 2008
Fig. 25.18 Stress-corrosion cracking of brass. Original magnification: 100×. Source: Ref 9 More
Image
Published: 01 June 2008
Fig. 25.19 Plug-type dezincification in α brass. Original magnification: 160×. Source: Ref 10 More
Image
Published: 01 January 2000
Fig. 26 Galvanic corrosion of steel pipe at brass fitting in humid marine atmosphere More
Image
Published: 01 January 2000
Fig. 30 Horseshoe-shaped depressions on the internal surface of a brass heat exchanger tube caused by erosion-corrosion. Source: Nalco Chemical Company More
Image
Published: 01 January 2017
Fig. 7.5 Effect of pH on average SCC velocity of brass specimens tested in two ammoniacal solutions. ◯, 0.88 mol/L of NH 3 + 0.05 mol/L Cu. □, 7.8 mol/L of NH 3 + 0.05 mol/L Cu. Source: Ref 7.23 More
Image
Published: 01 January 2017
Fig. 7.8 Effect of potential and stress intensity on crack velocity of α brass in 15 N aqueous ammonia containing 6 g/L Cu. Source: Ref 7.28 More
Image
Published: 01 January 2017
Fig. 7.9 Effect of applied potential on the time to fracture of α brass in Mattsson’s solutions of pH 7 containing 1 g·mol/L NH 4 + and different compositions of dissolved copper. Stress = 13.0 kg/mm 2 . Source: Ref 7.29 More
Image
Published: 01 January 2017
Fig. 7.12 Effects of temperature and strain rate on cracking velocity of α brass in 1 M NaNO 2 . Also shown is the maximum current density from rapid straining tests at different temperatures. Source: Ref 7.32 More
Image
Published: 01 January 2017
Fig. 7.15 Effect of grain size on time to failure of 70-30 brass tested in moist ammonia vapor. After Ref 7.48 More