This chapter, a detailed account of furnaces and related equipment for heat treating, begins by describing three basic modes of heat transmission, namely conduction, convection, and radiation, followed by a discussion on the working principle, applications, advantages, and disadvantages of furnaces classified based on the heat transfer medium employed. The types of furnaces covered are batch-type, continuous-type, liquid bath, fluidized bed, and vacuum. The subsequent sections provide information on furnace parts, fixtures, quenching mediums, and quenching systems. The final section of the chapter describes the types of atmospheres available, emphasizing their applications and limitations.

This chapter provides a concise, design-oriented summary of more than 30 sheet forming processes within the categories of bending and flanging, stretch forming, deep drawing, blank preparation, and incremental and hybrid forming. Each summary includes a description and diagram of the process and a bullet-point list identifying relevant equipment, materials, variations, and applications. The chapter also discusses critical process variables, interactions, and components and the classification of sheet metal parts based on geometry.

This chapter describes two types of auxiliary equipment required in most induction heating installations: cooling systems and device timers. Water- and vapor-based systems used for cooling the power supply and the induction coil are described. The chapter concludes with a brief discussion of timers, with emphasis on open-loop timing systems.

This chapter provides an overview of the state of the art in high-pressure cold spray equipment, including both spray systems and gas supply systems. The chapter describes the commercial cold spray systems developed by companies such as Cold Gas Technology (CGT) GmbH, Plasma Giken Company Ltd, Impact Innovations GmbH, and ASB Industries. Typical helium and nitrogen gas systems used in high-pressure cold spray processing are reviewed.

This chapter presents the primary considerations and mechanisms for corrosion and how they are involved in the selection of materials for process equipment in petroleum refineries and petrochemical plants. In addition, specific information on mechanical properties, corrosion, sulfide stress cracking, hydrogen-induced cracking, stress-oriented hydrogen-induced cracking, hydrogen embrittlement cracking, stress-corrosion cracking, velocity-accelerated corrosion, erosion-corrosion, and corrosion control is provided.

This chapter explains that the key to forging is understanding and controlling metal flow and influential factors such as tool geometry, the mechanics of interface friction, material characteristics, and thermal conditions in the deformation zone. It also reviews common forging processes, including closed-die forging, extrusion, electrical upsetting, radial forging, hobbing, isothermal forging, open-die forging, orbital forging, and coining.

After pouring, castings are allowed to solidify and cool. They are later removed from the molds in the shakeout operation. A series of activities then follow, which are generally referred to as finishing and heat treatment. These activities can be broadly categorized as shakeout, abrasive blast cleaning, removal of risers, ingates, and discontinuities, rough inspection, removal of discontinuities, finishing welding, heat treatment, and final visual, dimensional, and NDT inspection. This chapter provides a detailed discussion on these activities.

This chapter covers regulatory requirements, safe handling practices, hazard analysis and control, dismantling and decommissioning, and waste disposal. It also includes references for additional information on government regulations.

All superalloys, whether precipitation hardened or not, are heated at some point in their production for a subsequent processing step or, as needed, to alter their microstructure. This chapter discusses the changes that occur in superalloys during heat treatment and the many reasons such changes are required. It describes several types of treatments, including stress relieving, in-process annealing, full annealing, solution annealing, coating diffusion, and precipitation hardening. It discusses the temperatures, holding times, and heating and cooling rates necessary to achieve the desired objectives of quenching, annealing, and aging along with the associated risks of surface damage caused by oxidation, carbon pickup, alloy depletion, intergranular attack, and environmental contaminants. It also discusses heat treatment atmospheres, furnace and fixturing requirements, and practical considerations, including heating and cooling rates for wrought and cast superalloys and combined treatments such as solution annealing and vacuum brazing.

This article describes the repair of weld defects and failed structures. It provides information on three factors that must first be considered before attempting a repair, namely material weldability, nature of the failure that prompted the repair, and involvement of any code requirements. The article discusses the processes involved in welding process selection and the methods of preparing base metal for repair welding. It presents the guidelines for weld repairs of various ferrous (carbon steels, cast irons, and stainless steels) and nonferrous (for example, titanium) base metals.

This chapter discusses the design and operation of forging presses and hammers. It covers the most common types of presses, including hydraulic, mechanical, and screw presses, explaining how they work and comparing and contrasting their load and displacement profiles, stroke lengths, ram velocities, and energy and stiffness requirements. It also includes information on gravity- and power-drop hammers and where and how they are typically used.

Casting is one of the most economical manufacturing processes for providing shape to components of machinery and is used in a wide range of industries. This chapter is a brief account of the advantages, applications, limitations, and market growth of aluminum casting. It also provides information on the process of conversion of steel and iron parts to aluminum.

Induction and flame hardening are methods of hardening the surfaces of components, usually in selected areas, by the short-time application of high-intensity heating followed by quenching. These processes are used when gear teeth require high hardness, but size or configuration does not lend itself to carburizing and quenching the entire part. This chapter focuses on the processes involved in the induction and flame hardening, covering the applicable materials, hardening patterns, preheat treatment, quenching, tempering, surface hardness, case depth, hardening problems, dual-frequency process, and applications.

Increasing growth of high-pressure cold spraying applications on the industrial scale have forced global powder producers to face this challenge and develop specific powders for cold spray applications. This chapter provides information on the properties, classification, characteristics, manufacturing, and procedures for packaging of powders specific to cold spray applications.

Elevated-temperature failures are the most complex type of failure because all of the modes of failures can occur at elevated temperatures (with the obvious exception of low-temperature brittle fracture). Elevated-temperature problems are real concerns in industrial applications. The principal types of elevated-temperature failure mechanisms discussed in this chapter are creep, stress rupture, overheating failure, elevated-temperature fatigue, thermal fatigue, metallurgical instabilities, and environmentally induced failure. The causes, features, and effects of these failures are discussed. The cooling techniques for preventing elevated-temperature failures are also covered.

The temperature and atmosphere conditions must be precisely controlled in order to achieve the desired metallurgical results during heat treating operations. In order to ensure the repeatability of operation, a heat treating system must have the necessary sensors, timers, and variable (temperature, atmosphere, etc.) controllers to hold the process within prescribed or specified limits. This chapter discusses temperature and atmosphere sensors used in a heat treating system. The temperature sensors covered are contact and noncontact types. The atmosphere sensors covered are oxygen probe, dew point, and infrared. The chapter concludes with an overview of the development of integrated control systems.

The machinery and equipment required for rod and tube extrusion is determined by the specific extrusion process. This chapter provides a detailed description of the design requirements and principles of machinery and equipment for direct and indirect hot extrusion. It then covers the presses and auxiliary equipment for tube extrusion, induction furnaces for billet processing, handling systems for copper and aluminum alloy products, extrusion cooling systems, and age-hardening ovens. Next, the chapter describes the principles and applications of equipment for the production of aluminum and copper billets. Then, it focuses on process control in both direct and indirect hot extrusion of aluminum alloys without lubrication. The chapter describes the technology of electrical and electronic controls in the extrusion process. It ends with a discussion on the factors that influence the productivity and quality of the products in the extrusion process and methods for process optimization.

Most integrated titanium mills have primary working equipment designed specifically for titanium. This chapter describes the forging, rolling, and extruding equipment used to produce titanium mill products and sheds light on the corresponding process, structure, property relationships.

Fault-tree analysis is a graphical technique that identifies all events and combinations of events that can produce an undesired event. This chapter emphasizes several fault-tree analysis concepts, examining with examples how all three categories of charting symbols (events, gates, and transfer symbols) come together to generate a fault-tree analysis.

In forgings of both ferrous and nonferrous metals, the flaws that most often occur are caused by conditions that exist in the ingot, by subsequent hot working of the ingot or the billet, and by hot or cold working during forging. The inspection methods most commonly used to detect these flaws include visual, magnetic particle, liquid penetrant, ultrasonic, eddy current, and radiographic inspection. This chapter provides a detailed discussion on the characteristics, process steps, applications, advantages, and limitations of these methods. It also describes the flaws caused by the forging operation and the principal factors that influence the selection of a nondestructive inspection method for forgings.