Search Results for 90Cu-10Ni

This chapter outlines the step-by-step processes by which materials are selected in order to prevent or control corrosion and includes information on materials that are resistant to the various forms of corrosion. The various forms of corrosion covered are general (uniform) corrosion, localized corrosion, galvanic corrosion, intergranular corrosion, stress-corrosion cracking, hydrogen damage, and erosion-corrosion. In addition, the economic importance of cost-effective materials selection is also considered.

This chapter covers the friction and wear behaviors of copper alloys. It describes the compositions and forms of copper available and their suitability for applications involving friction, different types of erosion, and adhesive and abrasive wear.

Corrosion problems can be divided into eight categories based on the appearance of the corrosion damage or the mechanism of attack: uniform or general corrosion; pitting corrosion; crevice corrosion, including corrosion under tubercles or deposits, filiform corrosion, and poultice corrosion; galvanic corrosion; erosion-corrosion, including cavitation erosion and fretting corrosion; intergranular corrosion, including sensitization and exfoliation; dealloying; environmentally assisted cracking, including stress-corrosion cracking, corrosion fatigue, and hydrogen damage (including hydrogen embrittlement, hydrogen-induced blistering, high-temperature hydrogen attack, and hydride formation). All these forms are addressed in this chapter in the context of aqueous corrosion. For each form, a general description is provided along with information on the causes and the list of metals that can be affected, with particular emphasis on the recognition and prevention measures.

The nonferrous alloys described in this chapter include aluminum and aluminum alloys, copper and copper alloys, titanium and titanium alloys, zirconium and zirconium alloys, and tantalum and tantalum alloys. Some of the factors that affect the corrosion performance of welded nonferrous assemblies include galvanic effects, crevices, assembly stresses in products susceptible to stress-corrosion cracking, and hydrogen pickup and subsequent cracking. The emphasis is placed on the compositions, general welding considerations, and corrosion behavior of these alloys.

The challenge of materials selection is to achieve adequate performance at the lowest possible cost. Corrosion resistance is not the only property to be considered in making materials selections. Typical requirements and some of the procedures involved in making a selection and some of the factors that must be considered when determining the corrosion performance of a given material are listed in this chapter. The various steps that might be included in a materials selection process are then examined. These include a review of operating conditions and design, the selection of candidate materials, the in-depth evaluation of each candidate material, fabrication requirements, follow-up monitoring, and final materials selection. Material considerations such as cost, materials properties, and processing and fabrication requirements are subsequently covered. Finally, the chapter provides information on materials selection under general corrosion conditions and under conditions of localized corrosion forms such as pitting, crevice corrosion, and stress-corrosion cracking.

This chapter focuses on the effects of microscopic organisms and the by-products they produce on the electrochemical corrosion of metals. It begins by considering the characteristics of organisms that allow them to interact with the corrosion processes, the mechanisms by which organisms can influence the occurrence or rate of corrosion, and the types of corrosion most often influenced by microbes. The chapter then discusses the formation of biofilms on the surface of metals. This is followed by a list of industries most often reported as being affected by microbiological corrosion, along with the organisms usually implicated in the attack. The types of attack that have most commonly been documented are illustrated through generalized case histories for different classes of alloys. The chapter also describes the general approaches to be taken to prevent microbiologically influenced corrosion. It ends with some information on the inhibition of corrosion by the action of bacteria.

This chapter discusses the principles of corrosion of metals in aqueous environments. The thermodynamics of aqueous corrosion is the subject of the first half of this chapter, which addresses concepts such as corrosion reactions and free-energy change, the relationship between free energy and electrochemical potential, the effect of ionic concentration on electrode potential, and the corrosion behavior of a metal based on its potential-pH diagram. The corrosion (potential-pH) behavior of iron, gold, copper, zinc, aluminum, and titanium are described. Understanding the kinetics of corrosion and the factors that control the rates of corrosion reactions requires examination of the concepts of polarization behavior and identification of the various forms of polarization in an electrochemical cell. These concepts, addressed in the remaining of this chapter, include anodic and cathodic reactions, the mixed-potential theory, and the exchange currents.