Phase diagrams serve as a map to the phases present in an alloy at different temperatures and compositions. They also help in assessing mechanical properties, selecting heat treat temperatures, warning of possible solidification problems, and identifying routes for creating desired microstructures. This chapter familiarizes readers with the information contained in binary phase diagrams and the methods used to extract it. It explains how thermocouple measurements are used to determine liquidus, solidus, and eutectic reaction lines, how differential scanning calorimetry shows where phase reactions occur, and how x-ray diffraction identifies the actual phases present. It demonstrates the use of tie lines for determining phase composition at different temperatures and the application of the level rule to calculate phase fractions. It also discusses the CALPHAD method and presents computed binary phase diagrams that account for the presence of inclusions, oxygen content, and secondary phases.

This appendix contains sample problems with worked solutions pertaining to the use of binary phase diagrams. The problems require the determination of favorable temperatures and compositions, the amount and composition of phases in an alloy at a given temperature, the amount of a certain phase in different steels, and the microstructure developed in different alloys.

This chapter describes the iron-carbon phase diagram, its modification by alloying elements, and the effect of carbon on the chemistry and crystallography of austenite, ferrite, and cementite found in Fe-C alloys and steels. It also lays the groundwork for understanding important metallurgical concepts, including solubility, critical temperature, dislocation defects, slip, and diffusion, and how they affect the microstructure, properties, and behaviors of steel.

This chapter describes the structures, phases, and phase transformations observed in metals and alloys as they solidify and cool to lower temperatures. It begins with a review of the solidification process, covering nucleation, grain growth, and the factors that influence grain morphology. It then discusses the concept of solid solutions, the difference between substitutional and interstitial solid solubility, the effect of alloying elements, and the development of intermetallic phases. The chapter also covers the construction and use of binary and ternary phase diagrams and describes the helpful information they contain.

This chapter provides a brief overview of phase diagrams, explaining what they represent and how and why they are used. It identifies key points, lines, and features on a binary nickel-copper phase diagram and explains what they mean from a practical perspective. It also discusses the concept of equilibrium, the significance of Gibb’s phase rule, the theorem of Le Chatelier, and the use of the lever rule.

This chapter is a compilation of beryllium phase diagrams, representing more than 25 binary alloy systems from beryllium-aluminum to beryllium-zirconium. Each diagram is presented along with a summary and source reference.

This appendix presents an iron-carbon equilibrium diagram illustrating various phases a particular alloy of iron and carbon will go through when allowed to cool down to room temperature.

Phase diagrams are graphical representations that show the phases present in the material at various compositions, temperatures, and pressures. This chapter begins with a section describing the construction of phase diagrams for the simple binary isomorphous system. A binary phase diagram can be used to determine three important types of information: the phases that are present, the composition of the phases, and the percentages or fractions of the phases. The chapter then describes the construction of one common type of binary phase diagram i.e., the eutectic alloy system. The major eutectic systems include the aluminum-silicon eutectic system and the lead-tin eutectic system. The chapter discusses the construction of eutectic phase diagrams from free energy curves. It also provides information on peritectic, monotectic, and solid-state reactions in alloy systems. The presence of intermediate phases is also described. Finally, a brief section provides some information on ternary phase diagrams.

This chapter examines the isothermal phase transformations of the iron-carbide system. The discussion includes the formation of ferritic, eutectoid, hypoeutectoid, hypereutectoid, bainitic, and martensitic microstructures as well as their properties, composition, and metallurgy. The use of time-temperature-transformation (TTT) diagrams in understanding the phase transformations and the changes in the isothermal transformation curves due to the addition of carbon and other alloying elements are also discussed.

Steel is made by adding carbon to iron, producing a solid solution defined by its crystalline structure. This chapter discusses the effect of carbon composition and temperature on the types of structures, or phases, that form. Using detailed phase diagrams, it explains how low-carbon (hypoeutectoid) and high-carbon (hypereutectoid) steels are made, how they are classified, and how they compare. It also describes eutectoid steels which, at 0.77 wt% C, form a separate class noted for its microstructure.

Steels contain a wide range of elements, including alloys as well as residual processing impurities. This chapter describes the chemical composition of low-alloy AISI steels, which are classified based on the amounts of chromium, molybdenum, and nickel they contain. It explains why manganese is sometimes added to steel and how unintended consequences, such as the development of sulfide stringers, can offset the benefits. It also examines the effect of alloying elements on the iron-carbon phase diagram, particularly their effect on transformation temperatures.

This appendix includes two annotated iron-carbon (Fe-C) phase diagrams. One is a poster-size diagram showing iron-carbon phases up to 7 wt% C along with representative microstructures. The other diagram is close-up view showing the phases that occur from 0 to 1.2 wt% C. It also includes labels identifying the microconstituents that form in plain carbon steels under rapid quenching conditions.

This chapter introduces the basic ferrous physical metallurgy principles that need to be understood by the metallographer. The discussion focuses on the variations in microstructures that are generated as a result of the phase transformations that occur during both heat treatment (as in steels) and solidification (as in cast irons). The chapter describes how the development of the iron-carbon phase diagram, coupled with the understanding of the kinetics of phase transformations through the use of isothermal transformation diagram, were breakthroughs in the advancement of ferrous physical metallurgy. Several examples of the morphological features of microstructural constituents in steels are also presented.