Phase diagrams serve as a map to the phases present in an alloy at different temperatures and compositions. They also help in assessing mechanical properties, selecting heat treat temperatures, warning of possible solidification problems, and identifying routes for creating desired microstructures. This chapter familiarizes readers with the information contained in binary phase diagrams and the methods used to extract it. It explains how thermocouple measurements are used to determine liquidus, solidus, and eutectic reaction lines, how differential scanning calorimetry shows where phase reactions occur, and how x-ray diffraction identifies the actual phases present. It demonstrates the use of tie lines for determining phase composition at different temperatures and the application of the level rule to calculate phase fractions. It also discusses the CALPHAD method and presents computed binary phase diagrams that account for the presence of inclusions, oxygen content, and secondary phases.

This appendix contains sample problems with worked solutions pertaining to the use of binary phase diagrams. The problems require the determination of favorable temperatures and compositions, the amount and composition of phases in an alloy at a given temperature, the amount of a certain phase in different steels, and the microstructure developed in different alloys.

This chapter discusses the crystal structures of steel and cast iron, the iron-iron carbide equilibrium diagram, microconstituents or phases in the iron-iron carbide phase diagram, the iron-carbon carbide-silicon equilibrium diagram of cast irons, and the influence on microstructure by base elements and alloying elements. Graphitization, cooling rates, and heat treatment effects are covered. There also is discussion on inoculation benefits, flake graphite types and typical applications, evolution of cast iron types, ASTM specification A247 for graphite shapes, and selection of the best molding process. A large table lists typical material choices for various applications.

Unlike conventional quench and temper heat treatment, austempering is an iron and steel heat-treatment process that enhances mechanical properties through the isothermal transformation of austenite with a minimum amount of quenching stresses. This chapter begins with a discussion of austemperability requirements. Then outlines of austenitizing and austempering cycles and resultant microstructures are presented. This is followed by sections discussing the mechanical properties, advantages, limitations, machinability, process variants, and applications of austempered ductile iron (ADI). Information on the growth of premachined ADI components is also provided. Further, the chapter describes two slightly different systems for austempering: atmospheric-salt and salt-salt systems. Finally, it presents general guidelines for component designers, casting manufacturers, and heat treaters to apply ADI more widely and with improved success.

The building block of all matter, including metals, is the atom. This chapter initially provides information on atomic bonding and the crystal structure of metals and alloys, followed by a description of three crystal lattice structures of metals: face-centered cubic, hexagonal close-packed, and body-centered cubic. It then describes the four main divisions of crystal defects, namely point defects, line defects, planar defects, and volume defects. The chapter provides information on grain boundaries of metals, processes involved in atomic diffusion, and key properties of a solid solution. It also explains the aspects of a phase diagram that shows what phase or phases are present in the alloy under conditions of thermal equilibrium. Finally, a discussion on the applications of equilibrium phase diagrams is presented.

The existence of austenite and ferrite, along with carbon alloying, is fundamental in the heat treatment of steel. In view of the importance of structure and its formation to heat treatment, this chapter describes the various microstructures that form in steels, the various factors that determine the formation of microstructures during heat treatment processing of steel, and some of the characteristic properties of each of the microstructures. The discussion also covers the constitution of iron during heat treatment and the phases of heat-treated steel with elaborated information on iron phase transformation, hysteresis in heating and cooling, ferrite and austenite as two crystal structures of solid iron, and the diffusion coefficient of carbon.

The decomposition of austenite, during controlled cooling or quenching, produces a wide variety of microstructures in response to such factors as steel composition, temperature of transformation, and cooling rate. This chapter provides a detailed discussion on the isothermal transformation and continuous cooling transformation diagrams that characterize the conditions that produce the various microstructures. It discusses the mechanism and process variables of quenching of steel, explaining the factors involved in the mechanism of quenching. In addition, the chapter provides information on the causes and characteristics of residual stresses, distortion, and quench cracking of steel.

This chapter describes the metallurgy, composition, and properties of steels and other alloys. It provides information on the atomic structure of metals, the nature of alloy phases, and the mechanisms involved in phase transformations, including time-temperature effects and the role of diffusion, nucleation, and growth. It also discusses alloying, heat treating, and defect formation and briefly covers condenser tube materials.

This chapter describes some of the most effective tools for investigating boiler tube failures, including scanning electron microscopy, optical emission spectroscopy, atomic absorption spectroscopy, x-ray fluorescence spectroscopy, x-ray diffraction, and x-ray photoelectron spectroscopy. It explains how the tools work and what they reveal. It also covers the topic of image analysis and its application in the measurement of grain size, phase/volume fraction, delta ferrite and retained austenite, inclusion rating, depth of carburization/decarburization, scale thickness, pearlite banding, microhardness, and hardness profiles. The chapter concludes with a brief discussion on the effect of scaling and deposition and how to measure it.

This chapter describes the phases and constituents present in iron-carbon steels in near-equilibrium conditions. It explains how to use phase diagrams to predict and manage the development of ferrite, austenite, cementite, and pearlite through controlled cooling. It discusses the transformations, grain structure, and properties associated with each phase and identifies the primary stabilizing elements. It includes several micrographs revealing various microstructural features and describes the processing route by which they were achieved. It explains how to estimate the volume fraction of iron-carbon phases in equilibrium and how to determine the amount of each phase that must be present to reach a desired composition. The chapter also discusses the phases associated with hypo- and hyper-eutectoid steels and presents more than a dozen micrographs, identifying important structural features along with cooling conditions and sample preparation procedures.

Heat treatment is the most common way of altering the mechanical, physical, and even chemical properties of steels. This chapter describes the changes that occur in carbon and low-alloy steels during conventional heat treatments. It explains how austenite decomposition largely defines the final microstructure, and how the associated phase transformations are driven by nucleation and growth processes. It describes diffusionless and diffusive growth mechanisms and provides detailed information on the properties, structure, and behaviors of the transformation products produced, namely martensite and bainite. It also discusses the formation of austenite, the control and measurement of austenitic grain size, the characteristics of ferritic microstructures, and the methods used to classify ferrite morphology.

This chapter covers the early studies and various discoveries by metals researchers to study the internal structure of metals. The topics covered include light microscopy, phase diagrams, X-ray diffraction, principles of precipitation hardening, and dislocation theory.

This chapter provides an overview of the microstructure-property relationships associated with aluminum-silicon alloys. It includes information on commercial designations and grades, phase compositions, solidification paths, alloying elements, and intermetallic phases. It also provides solubility data and maps out the topics covered in subsequent chapters in the book.

This chapter serves as a study and guide on the main phase constituents of cast aluminum-silicon alloys, alpha-Al solid solution and Si crystals. The first section focuses on the structure of Al-Si castings in the as-cast state, covering the morphology of the alpha-Al solid solution grains and the process by which they form. It describes how cooling rates, temperature gradients, and local concentrations influence the topology of the crystallization front, and how they play a role in determining the morphology and dispersion degree of the grains observed in cross sections of cast parts. It also describes the mechanism behind dendritic grain crystallization and how factors such as surface tension, capillary length, and lattice symmetry affect dendritic arm size and spacing. The section that follows examines the morphology of the silicon crystals that form in aluminum-silicon castings and its effect on properties and processing characteristics. It discusses the faceted nature of primary Si crystals and the modification techniques used to optimize their shape. It also describes the morphology of the (alpha-Al + Si) eutectic, which can be lamellar or rodlike in shape, and explains how it can be modified through temperature control or alloy additions to improve properties such as tensile strength and plasticity and reduce shrinkage.

Structurally differentiated intermetallic phases are important constituents in the microstructure of aluminum alloys, with the potential to influence properties, behaviors, and processing characteristics. These phases can form in aluminum-silicon alloys with transition metals (Fe, Mn, Ni, Cr, V, Ti) and with metals such as Mg and Cu. This chapter is a compilation of phase diagrams, microstructure images, and tables, providing information on more than 30 binary, ternary, and quaternary alloy systems associated with intermetallic phases in aluminum-silicon castings. Each section includes tabular information and data on the intermetallic phases in the aluminum corner of the equilibrium phase diagram, the characteristics of the crystal lattice of intermetallic phases, the chemical composition of the alloy intermetallic phases, and equilibrium reactions in the alloy system.

This chapter is an atlas of microstructures observed in AlSi7Mg, AlSi11, and Al21CuNiMg modified with either eutectic (strontium, sodium) or hypereutectic (phosphorus) silicon crystals. The microstructure images reveal the as-cast state of gravity castings made in sand and metal molds, before and after modification. The chapter also provides composition data and includes callouts identifying various phase constituents in the interdendritic eutectic microstructure.