As semiconductor feature sizes have shrunk, the technology needed to encapsulate modern integrated circuits has expanded. Due to the various industry changes, package failure analyses are becoming much more challenging; a systematic approach is therefore critical. This article proposes a package failure analysis flow for analyzing open and short failures. The flow begins with a review of data on how the device failed and how it was processed. Next, non-destructive techniques are performed to document the condition of the as-received units. The techniques discussed are external optical inspection, X-ray inspection, scanning acoustic microscopy, infrared (IR) microscopy, and electrical verification. The article discusses various fault isolation techniques to tackle the wide array of failure signatures, namely IR lock-in thermography, magnetic current imaging, time domain reflectometry, and electro-optical terahertz pulse reflectometry. The final step is the step-by-step inspection and deprocessing stage that begins once the defect has been imaged.

In embedded systems, the separation between system level, board level, and individual component level failure analysis is slowly disappearing. In order to localize the initial defect area, prepare the sample for root cause analysis, and image the exact root cause, the overall functionality has to be maintained during the process. This leads to the requirement of adding additional techniques that help isolate and image defects that are buried deeply within the board structure. This article demonstrates an approach of advanced board level failure analysis by using several non-destructive localization techniques. The techniques considered for advanced fault isolation are magnetic current imaging for shorts and opens; infrared thermography for electrical shorts; time-domain-reflectometry for shorts and opens; scanning acoustic microscopy; and 2D/3D X-Ray microscopy. The individual methods and their operational principles are introduced along with case studies that will show the value of using them on board level defect analysis.

Many defects generate excessive heat during operation; this is due to the power dissipation associated with the excess current flow at the defect site. There are several thermal detection techniques for failure analysis and this article focuses on infrared thermography with lock-in detection, which detects an object's temperature from its infrared emission based on blackbody radiation physics. The basic principles and the interpretation of the results are reviewed. Some typical results and a series of examples illustrating the application of this technique are also shown. Brief sections are devoted to the discussion on liquid-crystal imaging and fluorescent microthermal imaging technique for thermal detection.

This chapter describes three approaches for 3D hot-spot localization of thermally active defects by lock-in thermography (LIT). In the first section, phase-shift analysis for analyzing stacked die packages is performed. The second example employs defocusing sequences for the localization of resistive electrical shorts in 3D architectures, and the third operates in cross sectional LIT mode to investigate defects in the insulation liner of Through Silicon Vias. All three approaches allow for a precise localization of thermally active defects in all three spatial dimensions to guide subsequent high-resolution physical analyses.

Post-mortem analysis of photovoltaic modules that have degraded performance is essential for improving the long term durability of solar energy. This article focuses on a general procedure for analyzing a failed module. The procedure includes electrical characterization followed by thermal imaging such as forward bias, reverse bias, and lock-in, and emission imaging such as electroluminescence and photoluminescence imaging.