This chapter discusses the fundamentals of plastic deformation and the role of strain and strain rate in sheet metal forming processes. It describes the conditions associated with uniform deformation, the significance of engineering and true strain, the effect of volume constancy on the tensile response of isotropic and anisotropic materials, and how infinitesimal strains or strain rates are used to express and analyze instantaneous deformation and local stain. It also discusses the concept of principal strain and strain paths and explains how to determine, and when to use, equivalent strain and strain rate.

This chapter familiarizes readers with the mechanisms involved in creep and how they are related to fatigue behavior. It explains that what we observe as creep deformation is the gradual displacement of atoms in the direction of an applied stress aided by diffusion, dislocation movement, and grain boundary sliding. It describes these mechanisms in qualitative terms, explaining how they are driven by thermal energy and how they can be analyzed using creep curves and deformation maps. In addition, it examines the types of damage associated with creep, presents a number of creep strain and strain rate equations, explains how to determine creep constants, and reviews the findings of several studies on cyclic loading. It also discusses the development of a novel test that measures the cyclic creep-rupture resistance of materials in tension and compression.

This chapter compares and contrasts empirical approaches for partitioning hysteresis loops and predicting creep-fatigue life. The first part of the chapter presents experimental partitioning methods, explaining how they can be used to partition any loading cycle into its basic strain-range components. The methods covered include rapid cycling between peak stress extremes, half-cycle rapid loading and unloading, and variations of the incremental step-stress approach. The methods are then compared based on their ability to predict creep-fatigue life. The chapter goes on from there to describe how fatigue life can be estimated from ductility measurements when cyclic data are unavailable or are likely to change. It also explains how cyclic life is influenced by the time-dependent nature of creep-plasticity and the physical and metallurgical effects of environmental exposure.

This chapter discusses the concept of mean stress and explains how it is used in fatigue analysis and design. It begins by examining the stress-strain response of test samples subjected to cyclic forces and strains, noting important features and what they reveal about materials and their fatigue behaviors. It then discusses the challenge of developing hysteresis loops for complex loading patterns and accounting for effects such as ratcheting and stress relaxation. The sections that follow provide a summary of the various ways mean stress is described in the literature and the methods used to calculate or predict its effect on the fatigue life of machine components. The discussion also sheds light on why tensile mean stress is detrimental to both fatigue life and ductility, while compressive mean stress is highly beneficial.

This chapter discusses the role of plastic deformation in forging and the effect of strain and strain rate on metal flow. It demonstrates the use of stress tensors and shows how metal flow can be represented qualitatively by the displacement of volume elements and quantitatively by the distribution of velocity components and strain rates. It describes the conditions associated with homogeneous deformation in a frictionless upset forging and explains how they can also be obtained using engineering and true stress-strain curves.