This chapter discusses the factors that play a role in fatigue failures and how they affect the service life of metals and structures. It describes the stresses associated with high-cycle and low-cycle fatigue and how they differ from the loading profiles typically used to generate fatigue data. It compares the Gerber, Goodman, and Soderberg methods for predicting the effect of mean stress from bending data, describes the statistical nature of fatigue measurements, and explains how plastic strain causes cyclic hardening and softening. It discusses the work of Wohler, Basquin, and others and how it led to the development of a strain-based approach to fatigue and the use of fatigue strength and ductility coefficients. It reviews the three stages of fatigue, beginning with crack initiation followed by crack growth and final fracture. It explains how fracture mechanics can be applied to crack propagation and how stress concentrations affect fatigue life. It also discusses fatigue life improvement methods and design approaches.

This chapter addresses the question of how to deal with multiaxial stresses and strains when using the strain-range partitioning method to analyze the effects of creep fatigue. It is divided into three sections: a general discussion on the rationale used in formulating rules for treating multiaxiality, a concise listing of the rules, and an example problem in which axial creep-fatigue data is used to predict the torsional creep-fatigue life of type 304 and 316 stainless steel. The chapter also includes a brief introduction in which the authors outline the challenges presented by multiaxial loading and set practical limits on the problem they intend to treat.

Fatigue failures occur due to the application of fluctuating stresses that are much lower than the stress required to cause failure during a single application of stress. This chapter describes three basic factors that cause fatigue: a maximum tensile stress of sufficiently high value, a large enough variation or fluctuation in the applied stress, and a sufficiently large number of cycles of the applied stress. The discussion covers high-cycle fatigue, low-cycle fatigue, and fatigue crack propagation. The chapter then discusses the stages where fatigue crack nucleation and growth occurs. It describes the most effective methods of improving fatigue life. The chapter also explains the effect of geometrical stress concentrations on fatigue. In addition, it explores the environmental effects of corrosion fatigue, low-temperature fatigue, high-temperature fatigue, and thermal fatigue. Finally, the chapter discusses a number of design philosophies or methodologies to deal with design against fatigue failures.

This chapter deals with the effects of fatigue in rotating shafts subjected to elastic and plastic strains associated with bending stresses. It begins with a review of the basic approach to treating low-cycle fatigue in bending, explaining that the assumption that stress is proportional to strain is incorrect due to plastic flow, causing considerable discrepancy between measured and calculated stresses. Data plots of the axial and bending fatigue characteristics of a 4130 steel help illustrate the problem. A closed-form solution is then presented and used to analyze the effects of flexural bending on solid as well as hollow rectangular and round bars. The chapter also discusses the difference in the treatment of a rotating shaft in which all surface elements undergo the same stress and strain and a nonrotating shaft in which a few surface elements carry most of the load. The difference, as explained, is due to the volumetric effect of stress in fatigue.

A high-pressure turbine blade in an aircraft engine failed prematurely, fracturing close to the root. Visual examination revealed significant plastic deformation on the leading edge of the blade, blocky cleavage on the trailing edge, and a region covered with fissures in between. Based on their observations and the results of SEM imaging described in the chapter, investigators concluded that the blade failed by low-cycle fatigue, acting on a preexisting crack.

Mechanical treatments such as grinding and shot peening are often employed in the production of case-carburized parts. Grinding, besides restoring precision, removes carbide films, internal oxidation, and high-temperature transformation products. Shot peening strengthens component surfaces and induces a stress state that increases fatigue resistance. This chapter describes both processes as well as roller burnishing. It explains how these treatments are applied and how they influence the microstructure, properties, and behaviors of case-hardened components. It also addresses process challenges, particularly in regard to grinding.

This chapter provides an overview of factors that must be considered in the design of structural components for satisfactory service performance in terms of mechanical behavior of steel castings. The chapter discusses designing against yielding, excessive deflection, and creep and stress rupture. The chapter describes the three main approaches to evaluating and designing structures relative to fatigue resistance: the S-N curve approach for high cycle fatigue, the strain range approach for low cycle fatigue, and the fracture mechanics approach. Two approaches to design against brittle fracture are described, the ductile to brittle transition concept and the fracture mechanics approach. The chapter also discusses several types of corrosion behavior and emphasizes the need to interact with corrosion specialists in the design process. It illustrates the unique advantages that designers may gain by designing components as castings to achieve low stress concentrations economically.