Rolling is unique in that it cannot be conducted without friction. Friction draws the workpiece into the roll gap and facilitates its passage through the deformation zone. This chapter provides an overview of the mechanics and tribology of flat rolling processes and explains how various aspects of the theory apply to shape rolling as well. It derives numerous equations and models to help quantify the forces, torque, and power involved in rolling operations and the associated heating, slip, strain distribution, and deformation in both the workpiece and rolls. It describes the friction and wear that occur in hot and cold rolling under hydrodynamic and mixed-film lubrication; the influence of viscosity, film thickness, rolling speed, interface pressure, pass reduction, and lubricant breakdown; and the effect of surface finish and defects. The chapter also provides best practices for evaluating, applying, and treating lubricants for industrially important materials including iron-base, nickel-base, and aluminum alloys.

This chapter provides an overview of the rolling and finishing processes required to create a sheet, plate, or foil product from a direct chill (DC) cast ingot. The flow paths, equipment, and operations are described with a view to the basic evolution of the microstructure, surface characteristics, and dimensions.

This chapter addresses the general effects of composition, mechanical treatment, surface treatment, processing, and fabrication operations on the corrosion resistance of aluminum and its alloys. Different types of surface treatments covered include claddings, anodizing, and conversion coatings. The processing steps that can have relatively significant impact on corrosion resistance are homogenization, rolling, extrusion, quenching, aging, and annealing.

Most integrated titanium mills have primary working equipment designed specifically for titanium. This chapter describes the forging, rolling, and extruding equipment used to produce titanium mill products and sheds light on the corresponding process, structure, property relationships.

This chapter discusses the equipment and processes used to convert titanium billet and bar into useful shapes or more refined product forms. These secondary working operations include open-die, closed-die, hot-die and isothermal forging as well as ring rolling and extruding. The chapter describes each method in detail and how it affects the microstructure and mechanical properties of various titanium alloys. It also discusses the propensity of titanium to react with oxygen and hydrogen when heated and explains how to mitigate the effects.

This chapter discusses the processes, procedures, and equipment used in the production of iron, steel, aluminum, and titanium alloys. It describes the design and operation of melting and refining furnaces, including blast furnaces, basic oxygen and electric arc furnaces, vacuum induction melting furnaces, and electroslag and vacuum arc remelting furnaces. It also covers casting, rolling, and annealing procedures and describes the basic steps in aluminum and titanium production.

The vast majority of beryllium products are manufactured from blocks, forms, or billets of compacted powder that are machined or worked into shape. This chapter describes the metalworking processes used, including rolling, forming, forging, extrusion, drawing, and spinning. It covers the qualitative and quantitative aspects of each process and provides examples showing how they are implemented and the results that can be achieved. The chapter also discusses the issue of beryllium’s low formability and describes some of the advancements that have been made in near-net shape processing.

This article discusses the steps in the primary processing of stainless steels: melting, refining, remelting, casting, and hot rolling. It provides information of the major categories of defects in hot rolled stainless steels, namely hot mill defects, inclusion-related defects, and hot ductility-related defects.

This chapter describes the general characteristics of two commonly classified metalworking processes, namely hot working and cold working. Primary metalworking processes, such as the bulk deformation processes used to conduct the initial breakdown of cast ingots, are always conducted hot. Secondary processes, which are used to produce the final product shape, are conducted either hot or cold. The chapter discusses the primary objectives, principal types, advantages, and disadvantages of both primary and secondary metalworking processes. They are rolling, forging, extrusion, sheet metal forming processes, blanking and piercing, bending, stretch forming, drawing, rubber pad forming, and superplastic forming.

This chapter discusses various processes involved in the production of steel from raw materials to finished mill products. The processes include hot rolling, cold rolling, forging, extruding, or drawing. The chapter provides a detailed description of two main furnaces used for making steel: the electric arc furnace and the basic oxygen furnace. It also provides information on the classification and specifications for various steels, namely, plain carbon steels, low-carbon steels, medium-carbon plain carbon steels, and high-carbon plain carbon steels. The chapter concludes with a general overview of the factors influencing corrosion in iron and steel and a brief discussion of corrosion-resistant coatings.

This chapter describes some of the more typical manufacturing practices, along with their benefits and limitations. The manufacturing practices covered include primary melting, electroslag remelting, rolling, hot and cold drawing, and continuous casting. The chapter discusses the advance and application of powder metallurgy. A few of the more recently introduced processes that hold considerable promise for producing tool steels or finished tools at a lower cost or with improved quality also are reviewed.