This chapter introduces basic extrusion concepts, including types, processes, mechanics, and the principal variables and their effects on extrusion. The chapter defines the two basic types of extrusion commonly used in the aluminum extrusion industry, direct and indirect. The chapter discusses the mechanics of extrusion including plastic deformation and metal flow, plastic strain and strain rate, extrusion pressure, and extrusion force. The principal variables of extrusion, including billet material flow stress, extrusion ratio, dead-metal zone semiangle, speed of deformation, and extrusion temperature are discussed.

Tribology plays a critical role in extrusion. This chapter provides an overview of tribology in extrusions including a discussion about the friction models at various locations of the extrusion tooling/die material interfaces and a discussion about wear and lubrication in extrusion die and tooling. The chapter shows a flow diagram highlighting the significant input variables necessary for computer simulation using the fundamentals of friction and thermodynamics models. The chapter explains the influence of principal variables on temperature rise in extrusion. It describes the most common industrial methods of isothermal extrusion of aluminum alloys.

This chapter discusses how aluminum and other alloying constituents are added to prepare a furnace charge for the melting process, and how it is cast into billets of various aluminum alloys. Fundamental aspects of billet casting are covered to give an overview of the casting process. The melting practice is discussed, as well as grain refining and degassing. Charge material, grain refining, degassing, filtration of melt, casting systems, and casting variables are discussed. The chapter concludes with a discussion of casting defects.

This chapter discusses the extrusion technology of soft- and medium-strength aluminum alloys. The relative extrudability ratings of some soft- and medium-grade alloys are given. The chapter presents useful extrusion parameters and their relationships associated with day-to-day production practices in the aluminum extrusion industry. Useful parameters discussed include: extrusion runout; extrusion pressure; ram or extrusion speed control; and butt or extrusion discard thickness control. The chapter provides fundamental approaches to introducing and developing the design of experiments (DOE) for the aluminum extrusion plant to improve overall productivity. It also focuses on heat treatment of aluminum alloys.

This chapter discusses the extrusion technology of hard alloys. The chapter provides an overview of hollow extrusion for aerospace application. It presents extrusion defects related to hard alloys. The chapter describes the extrusion quality requirements for aerospace applications. It also discusses extrusion of aluminum-matrix composites. The chapter outlines the powder metallurgy process for making billets for extrusion.

Variables affecting the cost of aerospace extrusions, including extrusion geometry, billet alloy, press size, order quantity, and the length of extrusion and final temper, are discussed in this chapter. Energy and labor inputs at various stages for aerospace extrusions are shown. The chapter offers insights into the economics of producing aerospace extrusions in a highly competitive global business market.

In this chapter, process control of each operational stage is discussed, with a detailed process-control flow diagram to provide a better understanding and to create a process-control document of each operational process stage. This chapter also presents fundamental ideas of a complete process- and quality-control framework system of an aluminum extrusion plant, starting from alloy and billet making to the final heat treatment process parameters required to bring the extrusion to the final alloy and temper designation to meet product requirements.

This chapter discusses the scope of research and development in aluminum extrusion technology. Research in the key technology areas of friction, thermodynamics, and die wear are discussed. The chapter also highlights future developments in extrusion technology.

This chapter deals with the mechanics and tribology associated with the extrusion of bars, sections, and tubes. It covers direct and indirect extrusion processes in detail and demonstrates the use of important equations, relationships, and measurements for determining pressure, force, material flow, friction, die wear, heat generation, and lubrication requirements. The chapter also provides information on hydrostatic, friction-assisted, and severe plastic deformation extrusion processes, discusses the cause of instabilities and defects, and explains how to select and apply lubricants to minimize friction and die wear when extruding steel, aluminum, copper, and refractory metals.

Aluminum shapes, rod, bar, tubes, and wire may be produced directly as extrusions or by subsequent processing of continuous cast stock. This chapter describes the key aspects of aluminum extrusion and wire production focusing on the more common hot extrusion process and presenting the general types of aluminum extrusion alloys. An overview of free-machining alloys and products, and weldable 6xxx and 7xxx high-strength structural alloys is also provided.

The conversion of feedstock into a shape involves the application of heat and pressure, and possibly solvents. This chapter discusses the operating principle, advantages, limitations, and applications of such shaping processes, namely additive manufacturing, cold isostatic pressing, die compaction, extrusion, injection molding, slip casting, slurry processes, and tape casting. Information on equipment setup, requirements, and the various factors influencing these processes are described. In addition, the chapter provides information on novel approaches and processing costs applicable to these shaping processes.

This chapter addresses the general effects of composition, mechanical treatment, surface treatment, processing, and fabrication operations on the corrosion resistance of aluminum and its alloys. Different types of surface treatments covered include claddings, anodizing, and conversion coatings. The processing steps that can have relatively significant impact on corrosion resistance are homogenization, rolling, extrusion, quenching, aging, and annealing.

Most integrated titanium mills have primary working equipment designed specifically for titanium. This chapter describes the forging, rolling, and extruding equipment used to produce titanium mill products and sheds light on the corresponding process, structure, property relationships.

This chapter discusses the equipment and processes used to convert titanium billet and bar into useful shapes or more refined product forms. These secondary working operations include open-die, closed-die, hot-die and isothermal forging as well as ring rolling and extruding. The chapter describes each method in detail and how it affects the microstructure and mechanical properties of various titanium alloys. It also discusses the propensity of titanium to react with oxygen and hydrogen when heated and explains how to mitigate the effects.

This chapter discusses bulk deformation processes and how they are used to reshape metals and refine solidification structures. It begins by describing the differences between hot and cold working along with their respective advantages. It then discusses various forging methods, including open-die and closed-die forging, hot upset and roll forging, high-energy-rate forging, ring rolling, rotary swaging, radial and orbital forging, isothermal and hot-die forging, precision forging, and cold forging. The chapter also includes information on cold and hot extrusion and drawing operations.

Magnesium, by volume, is two-thirds the weight of aluminum and one-quarter the weight of steel. It also has good damping capacity, giving it an edge over other metals in high-vibration environments. This chapter discusses the basic metallurgy, alloy designations, compositions, and mechanical properties of cast and wrought magnesium alloys. It also describes the processes used to produce magnesium parts, the causes and effects of corrosion, and the use of protective coatings and treatments.

This chapter discusses the composition, properties, and uses of the most common beryllium alloys and composites. It provides information on beryllium-aluminum, beryllium-copper, and beryllium-titanium as well as beryllium-antimony and beryllium-iron systems.