This article presents best practices for the metallographic preparation of specimens produced via thermal spray coating methods. It outlines typical metallographic preparation process flow, highlighting important considerations for obtaining a clear and representative specimen suitable for characterization via examination techniques, such as optical or electron microscopy. The process flow includes preliminary resin infiltration, sectioning, mounting, grinding, and polishing. To aid in the identification and resolution of common issues during subsequent specimen analysis, the article presents common issues, along with causes and mitigation strategies. It describes the processes involved in the interpretation of the thermal spray coating microstructure.

Thermal barrier coatings (TBCs) are applied using thermal spray coating (TSC) processes to components that are internally cooled and operated in a heated environment. The TSC microstructures are prone to interactions with common metallographic procedures that may result in artifacts and misinterpretation of the TSC microstructure. This article aims to aid in identifying metallographic TSC artifacts, specifically in the air plasma spray zirconia-based TBC, including both of its common constituents, the bond coating and the top coating. Artifacts that result from specific sectioning and mounting practices, as well as from different polishing times, are presented. Additionally, the article discusses the factors in optical microscopy and scanning electron microscopy that affect microstructure interpretation.

This article introduces the wafer-level fault localization failure analysis (FA) process flow for an accelerated yield ramp-up of integrated circuits. It discusses the primary design considerations of a fault localization system with an emphasis on complex tester-based applications. The article presents examples that demonstrate the benefits of the enhanced wafer-level FA process. It also introduces the setup of the wafer-level fault localization system. The application of the wafer-level FA process on a 22 nm technology device failing memory test is studied and some common design limitations and their implications are discussed. The article presents a case study and finally introduces a different value-add application flow capitalizing on the wafer-level fault localization system.

Moore's Law has driven many degree circuit features below the resolving capability of optical microscopy. Yet the optical microscope remains a valuable tool in failure analysis. This article describes the physics governing resolution and useful techniques for extracting the small details. It begins with the basic microscope column and construction. The article discusses microscope adjustments, brightfield and darkfield illumination, and microscope concepts important to liquid crystal techniques. It also discusses solid immersion lenses, infrared and ultraviolet microscopy and concludes with laser microscopy techniques such as thermal induced voltage alteration and external induced voltage alteration.

This chapter discusses the practices and procedures used to reveal and record macrostructural features such as hardening depth, weld thickness, crack size, porosity, hot folds, and machining and tooling marks. It provides information on sectioning, sample location, orientation, surface grinding, and etching. It describes macrographic etchants and the features they reveal along with common etching problems and how to avoid them. It explains how to evaluate etching results and how they can be improved using remedial processes such as light grinding. It also discusses photographic reproduction, lighting, and image enhancement techniques.

This chapter explains how to prepare material samples for optical microscopy, the most common method for characterizing the microstructure of cast iron and steel. It provides information on sectioning, mounting, polishing, etching, and recording. It describes the nature of surface roughness, the factors that contribute to it, and its effect on image quality. It discusses the use of fixturing and holding devices, includes photographic examples of polishing defects and drying marks, and provides an overview of micrographic etchants and the features they reveal. It also describes the steps involved in replicating part surfaces.

This chapter describes the methods and equipment applicable to metallographic studies and discusses the preparation of specimens for examination by light optical microscopy. Five major operations for preparation of metallographic specimens are discussed: sectioning, mounting, grinding, polishing, and etching. The discussion covers their basic principles, advantages, types, and applications, as well as the equipment setup. The chapter includes tables that list etchants used for microscopic examination. It also provides information on microscopic examination, microphotography, and the effects of grain size on the structural properties of the material.

This chapter provides a general description of materials and methods for manufacturing high-performance composites. The materials covered are polymer matrices and prepreg materials and the methods include infusion processes, composite-toughening methods, matrix-toughening methods, and dispersed-phase toughening. In addition, the chapter provides information on interlayer-toughened composites and honeycomb or foam structure composite materials. It also discusses the processes in optical microscopy of composite materials.

Specimen preparation is the first step that determines the quality of the microstructural information that can be obtained using optical microscopy. This chapter describes the sample preparation methods that are applicable to most types of composite materials containing short discontinuous or continuous fibers. The sample preparation methods cover documentation and labeling of samples, sectioning the composite, clamp-mounting composite samples, mounting composite samples in casting resins, and the addition of contrast dyes to casting resins. Information on the molds used for mounting composite materials is provided. The steps recommended to achieve a good mounted specimen without voids or specimen pull-out are also described. The chapter discusses the processes for clamping mounted composite samples in automated polishing heads and mounting composite materials for hand polishing. A summary of the mounting technique is also included.

The analysis of composite materials using optical microscopy is a process that can be made easy and efficient with only a few contrast methods and preparation techniques. This chapter is intended to provide information that will help an investigator select the appropriate microscopy technique for the specific analysis objectives with a given composite material. The chapter opens with a discussion of macrophotography and microscope alignment, and then goes on to describe various illumination techniques that are useful for specific analysis requirements. These techniques include bright-field illumination, dark-field illumination, polarized-light microscopy, interference and contrast microscopy, and fluorescence microscopy. The chapter also provides a discussion of sample preparation materials such as dyes, etchants, and stains for the analysis of composite materials using optical microscopy.

Transmitted-light methods reveal more details of the morphology of fiber-reinforced polymeric composites than are observable using any other available microscopy techniques. This chapter describes the various aspects relating to the selection and preparation of ultrathin-section specimens of fiber-reinforced polymeric composites for examination by transmitted-light microscopy techniques. The preparation steps covered are a selection of the rough section, preparation of the rough section for preliminary mounting, grinding and polishing the primary-mount first surface, mounting the first surface on a glass slide, and preparing the second surface (top surface). The optimization of microscope conditions and analysis of specimens by microscopy techniques are also covered. In addition, examples of composite ultrathin sections that are analyzed using transmitted-light microscopy contrast methods are shown throughout.

The formation of microcracks in composite materials may arise from static-, dynamic-, impact-, or fatigue-loading situations and also by temperature changes or thermal cycles. This chapter discusses the processes involved in the various methods for the microcrack analysis of composite materials, namely bright-field analysis, polarized-light analysis, contrast dyes analysis, and dark-field analysis. The analysis of microcracked composites using epi-fluorescence is also covered. In addition, the chapter describes the procedures for the determination and recording of microcracks in composite materials.

This atlas contains images showing how sintering conditions (time, temperature, and atmosphere) and compaction pressure affect the microstructure of different types of stainless steel. It also includes images of stainless steel powders, fracture surfaces, and test specimens characterized by the presence of compounds, such as oxides, carbides, and nitrides, and various forms of corrosion.

This chapter describes the various features of the metallurgical microscope. Key concepts are defined such as resolving power, the virtual image, bright- and dark-field illumination, numerical aperture, focal length, image contrast, depth of field, and spherical and chromatic aberration. Metallurgical microscope features such as apochromatic objectives, hyperplane oculars, vertical illuminators, counting reticles, widefield oculars, polarization filters, field diaphragms, interferometers, and tungsten-halogen lamps are explained. The optical system, nosepiece, types of objectives (the lens assembly close to the specimen) and eyepieces, and components of the illumination system are all explained. The last part of this chapter describes special procedures involved in using and calibrating the metallurgical microscope.

Several specialized instruments are available for the metallographer to use as tools to gather key information on the characteristics of the microstructure being analyzed. These include microscopes that use electrons as a source of illumination instead of light and x-ray diffraction equipment. This chapter describes how these instruments can be used to gather important information about a microstructure. The instruments covered include image analyzers, transmission electron microscopes, scanning electron microscopes, electron probe microanalyzers, scanning transmission electron microscopes, x-ray diffractometers, microhardness testers, and hot microhardness testers. A list of other instruments that are usually located in a research laboratory or specialized testing laboratory is also provided.

This chapter explains what some of the terms used in physical metallurgy are intended to mean and how these meanings affect the manner in which the subject is treated throughout the book.

This chapter describes the effects that can be observed by light microscopy when a steel in the hardened condition, consisting of martensite and possibly some retained austenite, is heated at subcritical temperatures. It includes micrographs that illustrate the effect of carbide precipitation, the decomposition of retained austenite, and recovery and recrystallization. It also includes images that reveal the characteristic structures produced by tempering medium-carbon hypoeutectoid and hypereutectoid steels as well as the effects of plastic deformation, austenitic grain size, and temper brittleness.