This chapter focuses on induction heating principles, including penetration depth and temperature distribution, frequency ranges, inductor efficiency, and power turnover. It also lists the power densities of commonly used heat sources.

This chapter provides a discussion on the power supplies of modern induction heating plants. It describes the mode of operation and functional principle of an inverter. The chapter also provides a short note on generator cooling, which is required for the components of the induction power supply. It then presents an overview of induction heating systems.

This chapter explains the fundamentals of soldering technology and provides an overview of the soldering process. It discusses the wetting of the molten solder filler metal to the base material surface and the design aspects when induction heating is used to make the solder joint.

This chapter presents the following groupings of metals and alloys that are soldered together: steel and iron-base alloys, aluminum and aluminum alloys, and copper and copper alloys. It also presents the ancillary materials and process methods that assist the solder filler metal in completing the solder joint through induction heating. The chapter focuses on the selection of fluxes and the use of inert gases or even vacuum to realize an oxide-free base material surface both before and during the soldering process.

This chapter explores case studies on using induction heating for joining applications, encompassing both soldering and brazing to demonstrate versatility. Each study focuses on inductor coil design, workpiece geometry, and production quantities, emphasizing optimization due to the interplay between material geometry, coil configuration, and process parameters like generator frequency and power. The case studies provide real-world data on effectively implementing induction heating in joining processes.

This chapter describes case depth and discusses flame hardening, laser heat treatment, electron beam hardening, induction heat treatment, and induction hardening.

This chapter focuses on gas carburizing. It includes a history of carburizing and explains the objectives of the carburizing process. The chapter discusses atmospheres, sources of carbon, reactions in the gas carburizing process, and effects of process variables such as temperature and time. Furnaces for gas carburizing are described and potential microstructure problems are introduced.

Carbonitriding introduces and diffuses atomic nitrogen into the surface steel during carburization. This chapter focuses on case composition of a carbonitrided case, case depth, case hardenability, hardness gradients, void formation, and applications of carbonitriding. The chapter discusses furnaces suitable for carbonitriding, atmosphere constituents, batch furnace atmospheres, continuous furnace atmospheres, safety, temperature selection, quenching, tempering, and hardness testing of a carbonitrided case.

This chapter details suitable steels for gas nitriding and discusses conventional gas nitriding, plasma (Ion) nitriding, the ferritic nitrocarburizing processes, gaseous ferritic nitrocarburizing, plasma nitrocarburizing, and the salt-bath ferritic nitrocarburizing processes.

This article introduces some of the general sources of heat treating problems with particular emphasis on problems caused by the actual heat treating process and the significant thermal and transformation stresses within a heat treated part. It addresses the design and material factors that cause a part to fail during heat treatment. The article discusses the problems associated with heating and furnaces, quenching media, quenching stresses, hardenability, tempering, carburizing, carbonitriding, and nitriding as well as potential stainless steel problems and problems associated with nonferrous heat treatments. The processes involved in cold working of certain ferrous and nonferrous alloys are also covered.

A working knowledge of diffusion is necessary to understand and predict the behavior of metals and alloys during manufacturing and in certain types of service. This chapter covers the fundamentals of diffusion in solids and some of the applications in which diffusion plays a role. It discusses the mechanisms behind interstitial, substitutional, grain boundary, and surface diffusion, the derivation and use of Fick’s laws, and the basic principles of diffusion coating processes, including carburizing, nitriding, nitrocarburizing, cyaniding, carbonitriding, boriding, aluminizing, siliconizing, chromizing, vanadizing, and titanizing. It also discusses diffusion bonding and presents several approaches for dealing with oxide barrier problems.

This chapter familiarizes readers with the use of Fick’s laws of diffusion in heat treating, coating, and other metallurgical processes. It contains worked solutions to nearly 30 problems requiring the calculation of activation energy, diffusion coefficient, concentration level, surface layer thickness, case depth, and processing time and temperature. The selected problems deal with various types of iron, steel, and nonferrous alloys and processes ranging from aluminizing, chromizing, carburizing, and plasma nitriding to hydrogen dissipation, decarburizing, and oxidation. A few diffusion problems involving single-crystal silicon are also included.

This chapter covers coatings and treatments that are used to improve the friction and wear behaviors of materials. It describes modifications that work by hardening contacting surfaces, including heat treating, vacuum coating, thermal spray, and plating, and those that separate or lubricate surfaces, including solid film, chemical conversion, and vacuum coatings, surface oiling and texturing, and lubricating platings. It compares and contrasts methods based on thickness and depth and their relative effect on friction, erosion, and wear.

Cast irons, like steels, are iron-carbon alloys but with higher carbon levels than steels to take advantage of eutectic solidification in the binary iron-carbon system. Like steel, heat treatment of cast iron includes stress relieving, annealing, normalizing, through hardening, and surface hardening. This chapter introduces solid-state heat treatment of iron castings, covering general considerations for heat treatment and discussing the processes, advantages, and disadvantages of heat treatment of cast iron.

This chapter provides a practical understanding of heat treatments and how to employ them to optimize the properties and structures of cast irons and steels. It discusses annealing, normalizing, quenching, tempering, patenting, carburizing, nitriding, carbonitriding, and nitrocarburizing. It describes the primary objectives of each treatment along with processing sequences, process parameters, and related phase transformations. The chapter contains more than 100 images, including time-temperature diagrams, transformation curves, data plots, and detailed micro- and macrographs. It also discusses the concepts of hardenability, critical diameter, quench severity, and Jominy testing.

This chapter discusses the evolution of engineering alloy steels, namely chromium, nickel, and nickel-chromium alloy steels. The discussion includes the automotive demand and development of specifications for the alloy steels. It also covers various research on heat treatment of alloy steels, providing information on hardening, transformation of austenite, hardenability testing, and tempering of as-quenched martensite.

This chapter provides a brief review of the scientific and technological developments leading to the widespread use of induction heat treating and its many applications in industry.

This chapter discusses the basic principles of induction heating and related engineering considerations. It describes the design and operation of induction coils, the magnitude and distribution of magnetic fields, and the forces that generate eddy currents in metals. It explains how induced electrical current causes metal to heat in proportion to their electrical resistance and how it affects temperature dependent properties such as resistivity and specific heat and, in turn, heating rates and efficiencies. It also discusses the effect of hysteresis and explains why eddy currents tend to be confined to the outer surface of the workpiece, a phenomenon known as the skin effect. The chapter includes several data plots showing how the depth of heating varies with frequency and how heating time, power density, and thermal conduction rate correspond with hardening depth.

This chapter discusses the basic components in an induction heat treating system. It describes the design and operating characteristics of power supplies, load-matching transformers, tuning capacitors, power regulators, controllers, process monitors, and diagnostic systems. It also provides information on fixtures and work-handling devices, quench systems, and load matching and tuning procedures.