This chapter discusses two damage mechanisms in which stress plays a major role. In the one case, stress causes cracks in the oxide scale on metals, leading to preferential corrosion attack. An example from industry of this type of failure is the circumferential cracking that occurs on the waterwall tubes of supercritical coal-fired boilers fired under low NOx combustion conditions, conducive to the production of sulfidizing environments. In the other case, stress contributes to brittle fracture in the form of intergranular cracking. The phenomenon, which is known by various names, typically occurs at the lower end of the intermediate temperature range and has been observed in ferritic steels, stainless steels, Fe-Ni-Cr alloys, and nickel-base alloys, as described in the chapter.

This chapter presents an overview and survey of solder alloy systems. Extensive reference is made to phase diagrams and their interpretation. The chapter describes the effect of metallic impurities on different solders. The chapter concludes with a review of the key characteristics of eutectic alloys and of the factors most effective at depressing the melting point of solders by eutectic alloying.

Materials used in joining, whether solders, fluxes, or atmospheres, are becoming increasingly subjected to restrictions on the grounds of health, safety, and pollution concerns. These regulations can limit the choice of materials and processes that are deemed acceptable for industrial use. The chapter addresses this issue with a focus on soldering fluxes. The chapter also describes factors related to soldering under a protective atmosphere, provides information on chemical fluxes for soldering of various metals, and discusses the processes involved in fluxless soldering processes.

This chapter considers the materials and processing aspects of soldering and the manner in which these interrelate in the development of joining processes. It discusses the processes involved in eliminating or suppressing metallurgical and mechanical constraints as well as constraints imposed by the components.

This chapter presents several materials and processes related to soldering technology. It first provides information on lead-free solders, followed by sections devoted to flip-chip processes, diffusion soldering, and modeling. Scanning acoustic microscopy and fine-focus x-ray techniques are also discussed. The chapter describes several evaluation procedures and tests developed to measure solderability and standards for process calibration. The chapter also describes the characteristics of reinforced solders, amalgams used as solders, and other strategies to boost the strength of solders. Further, the chapter considers methods for quantifying the mechanical integrity of joints and predicting their dimensional stability under specified environmental conditions. It discusses the effects of rare earth elements on the properties of solders. The chapter concludes with information on advanced joint characterization techniques.

This appendix contains a brief list of general references related to soldering technology.

This chapter describes the origins of solders and soldering, covering the composition of solders and applications of soldering.

Soldering and brazing represent one of several types of methods for joining solid materials. These methods may be classified as mechanical fastening, adhesive bonding, soldering and brazing, welding, and solid-state joining. This chapter summarizes the principal characteristics of these joining methods. It presents a comparison between solders and brazes. Further details on pressure welding and diffusion bonding are also provided. Key parameters of soldering are discussed, including surface energy and surface tension, wetting and contact angle, fluid flow, filler spreading characteristics, surface roughness of components, dissolution of parent materials and intermetallic growth, significance of the joint gap, and the strength of metals. The chapter also examines the principal aspects related to the design and application of soldering processes.

This chapter presents abbreviations and symbols used for soldering.

This article discusses the general purpose of alloying and identifies some of the material properties and behaviors that can be improved by adding various elements to the base metal. It explains how alloying can make metals stronger and more resistant to corrosion and wear as well as easier to cast, weld, form, and machine. It also discusses some of the alloying techniques that have been developed to address problems stemming from dissimilarities between the base metal and alloying or inoculate material.

This article covers the metallurgy and properties of gray irons. It describes the classes or grades of gray iron, the types of applications for which they are suited, and the corresponding compositional ranges. It discusses the role of major, minor, and trace elements, how they are added, and how they affect various properties, behaviors, and processing characteristics. It explains how silicon, chromium, and nickel, in particular, improve high-temperature, corrosion, and wear performance.

This article discusses the metallurgy and properties of ductile cast iron. It begins with an overview of ductile or spheroidal-graphite iron, describing the specifications, applications, and compositions. It then discusses the importance of composition control and explains how various alloying elements affect the properties, behaviors, and processing characteristics of ductile iron. The article describes the benefits of nickel and silicon additions in particular detail, explaining how they make ductile iron more resistant to corrosion, heat, and wear.

This article discusses the composition and morphology of compacted graphite (CG) iron relative to that of gray and ductile iron. It explains that the graphite in CG iron is intermediate in shape between the spheroidal graphite found in ductile iron and the flake graphite in gray iron, giving it distinct advantages in a number of applications. The article also discusses the role of melt treatment elements and explains how alloying and heat treatment affect tensile strength, hardness, toughness, and ductility.

This article explains how malleable iron is produced and how its microstructure and properties differ from those of gray and ductile iron. Malleable iron is first cast as white iron then annealed to convert the iron carbide into irregularly shaped graphite particles called temper carbon. Although malleable iron has largely been replaced by ductile iron, the article explains that it is still sometimes preferred for thin-section castings that require maximum machinability and wear resistance. The article also discusses the annealing and alloying processes by which these properties are achieved.

This article discusses the production, properties, and uses of high-alloy white irons. It explains how the composition and melt are controlled to produce a large volume of eutectic carbides, making these irons particularly hard and resistant to wear, and how the metallic matrix supporting the carbide phase can be adjusted via alloy content and heat treatment to optimize the balance between abrasion resistance and impact toughness. It also describes the effect of alloying elements and inoculants on various properties and behaviors and provides information on commercial alloy grades and applications.

This article discusses the role of alloying in the production and use of carbon and low-alloy steels. It explains how steels are defined and selected based on alloy content and provides composition and property data for a wide range of designations and grades. It describes the effect of alloying on structure and composition and explains how alloy content can be controlled to optimize properties and behaviors such as ductility, strength, toughness, fatigue and fracture resistance, and resistance to corrosion, wear, and high-temperature creep. It also examines the effect of alloying on processing characteristics such as hardenability, formability, weldability, machinability, and temper embrittlement. In addition, the article provides an extensive amount of engineering data with relevance in materials selection.

This article discusses the effect of alloying on high-strength low-alloy (HSLA) steels. It explains where HSLA steels fit in the continuum of commercial steels and describes the six general categories into which they are divided. It provides composition data for standard types or grades of HSLA steel along with information on available mill forms, key characteristics, and intended uses. The article explains how small amounts of alloying elements, particularly vanadium, niobium, and titanium, control not only the properties of HSLA steels, but also their manufacturability.

This article provides an overview of tool steels, discussing their composition, properties, and behaviors. It covers all types and classes of wrought and powder metal tool steels, including high-speed steels, hot and cold-work steels, shock-resisting steels, and mold steels. It explains how the properties of these steels are determined by alloying elements, such as tungsten, molybdenum, vanadium, manganese, and chromium, and the presence of alloy carbides. It describes the types of carbides that form and how they contribute to wear resistance, toughness, high-temperature strength, and other properties.

This article discusses the effects of alloying on the properties and behaviors of maraging steels. It describes how maraging steels differ from conventional steels in that they are strengthened, not by carbon, but by the precipitation of intermetallic compounds. It explains how maraging steels typically have high levels of nickel, cobalt, and molybdenum with little carbon content and how that affects their dimensional stability, fracture toughness, weldability, and resistance to stress-corrosion cracking.