Skip Nav Destination
ASM Technical Books
Cold and Hot Forging: Fundamentals and Applications
Edited by
ASM International
ISBN electronic:
978-1-62708-300-3
Publication date:
2005
Book Chapter
Chapter 16: Process Modeling in Impression-Die Forging Using Finite-Element Analysis
-
Published:2005
Page range:
193 - 209
Abstract
This chapter discusses the use of finite-element modeling in forging design. It describes key modeling parameters and inputs, mesh generation and computation time, and process modeling outputs such as metal flow, strain rate, loading profiles, and microstructure. It also includes a variety of application examples.
You do not currently have access to this chapter.
Citation
Manas Shirgaokar, Gracious Ngaile, Gangshu Shen, Process Modeling in Impression-Die Forging Using Finite-Element Analysis, Cold and Hot Forging: Fundamentals and Applications, Edited By Taylan Altan, Gracious Ngaile, Gangshu Shen, ASM International, 2005, p 193–209, https://doi.org/10.31399/asm.tb.chffa.t51040193
Download citation file:
Related Book Content
Process Modeling in Cold Forging Using Finite-Element Analysis
Cold and Hot Forging Fundamentals and Applications
Process Design in Impression-Die Forging
Cold and Hot Forging Fundamentals and Applications
A Simplified Method to Estimate Forging Load in Impression-Die Forging
Cold and Hot Forging Fundamentals and Applications
Workability in Forging
Metalworking: Bulk Forming
Isothermal and Hot-Die Forging
Metalworking: Bulk Forming
Forging Design Involving Corners and Fillets
Metalworking: Bulk Forming
Models for Fracture during Deformation Processing
Fundamentals of Modeling for Metals Processing
Modeling of Residual Stress and Machining Distortion in Aerospace Components
Metals Process Simulation
Glossary of Terms: Modeling for Metals Processing
Fundamentals of Modeling for Metals Processing
Cracking on the Parting Line of Closed-Die Forgings
Handbook of Case Histories in Failure Analysis