Skip Nav Destination
ASM Technical Books
Cold and Hot Forging: Fundamentals and Applications
Edited by
ASM International
ISBN electronic:
978-1-62708-300-3
Publication date:
2005
Book Chapter
Chapter 13: Billet Separation and Shearing
By
-
Published:2005
Page range:
151 - 157
Abstract
Separation of billets by shearing avoids material loss and is considerably faster than sawing or cutting. This chapter discusses the billet shearing process, the characteristics of sheared surfaces, and the effect of various operating parameters on surface quality. It also includes formulas for calculating shearing force, work, and power and describes various ways to increase production rates.
You do not currently have access to this chapter.
Citation
Serdar Isbir, Pinak Barve, Billet Separation and Shearing, Cold and Hot Forging: Fundamentals and Applications, Edited By Taylan Altan, Gracious Ngaile, Gangshu Shen, ASM International, 2005, p 151–157, https://doi.org/10.31399/asm.tb.chffa.t51040151
Download citation file:
Related Book Content
Blanking
Sheet Metal Forming Processes and Applications
Billet Casting Principles and Practice
Aluminum Extrusion Technology
Roll Forging
Metalworking: Bulk Forming
Practical Aspects of Converting Ingot to Billet
Metalworking: Bulk Forming
Extrusion of Hard Alloys
Aluminum Extrusion Technology
Machinery and Equipment for Direct and Indirect Hot Extrusion
Extrusion (Second Edition)
Ingot Metallurgy and Mill Products
Titanium: A Technical Guide (Second Edition)
Lubrication and Wear in Sheet Forming
Friction, Lubrication, and Wear Technology
Ultrasonic Inspection of a 1.7 m (68 in.) Diam 8822 Steel Billet and the Ring Into Which It Was Rolled
ASM Failure Analysis Case Histories: Processing Errors and Defects
Shearing of Bars and Bar Sections
Metalworking: Sheet Forming