Investigation on Bulging of Blow Pipe in a Blast Furnace
After about a year of uninterrupted service, one of the blow pipes on a blast furnace developed a bulge measuring 300 x 150 x 12 mm. The conical shaped section was removed from the furnace and examined to determine why it failed. The investigation consisted of visual inspection, chemical analysis, microstructural characterization, and mechanical property testing. The pipe was made from nonresulfurized carbon steel as specified and was lined with an alumina refractory. Visual inspection revealed cracks in the refractory lining, which corresponded with the location of the bulge. Microstructural and EDS analysis yielded evidence of overheating, revealing voids,...
Pankhuri Sinha, Goutam Mukhopadhyay, Sandip Bhattacharyya, Investigation on Bulging of Blow Pipe in a Blast Furnace, Handbook of Case Histories in Failure Analysis, Vol 3, Edited By Larry Berardinis, ASM International, 2019, p 688–694, https://doi.org/10.31399/asm.fach.v03.c9001850
Download citation file:
2021 Catalog: Issue 1
View new, upcoming, and best-selling ASM Handbooks, technical books, and databases.