Passive Voltage Contrast (PVC) in a Scanning Electron Microscope (SEM) or a Focused Ion Beam (FIB) is a key Failure Analysis (FA) technique to highlight a leaky gate. The introduction of Silicon On Insulator (SOI) substrate in our recent automotive analog mixed-signal technology highlighted a new challenge: the Bottom Oxide (BOX) layer, by isolating the Silicon Active Area from the bulk made PVC technique less effective in finding leaky MOSFET gates. A solution involving sample preparation performed with standard FA toolset is proposed to enhance PVC on SOI substrate.

FA cannot consist of simply jumping to conclusions. The FA process is validated through correlation with the initial failure and through interpretation of the obtained results, subjective by definition. This paper illustrates the difficulty of analyzing complex failures caused by multiple factors, including wafer fabrication, assembly, and application conditions. Inter-Layer Dielectric (ILD) delamination was experienced on various ICs from the same 250nm technology. A complete set of techniques (C-SAM, laser and optical microscopy, SEM, FIB cross-sections, TEM, EFTEM, SIMS, Auger, delineation) was used as different pieces of the same puzzle to reveal the multiple factors contributing to the ILD delamination failures. Due to the subtle nature of some of the underlying causes, defining an accurate FA approach with appropriate sample preparation and accurate device traceability was critical to understanding this complex, multivariate issue.

This paper presents a case study on photon emission from metals and demonstrates the capability of Emission Microscopy Si-CCD camera to detect micro metal bridges on functional failures of Analog devices.