In recent years continuous and extensive research and development activities have been being done worldwide on 700°C A-USC (Advanced Ultra Super Critical) power plants to achieve higher efficiency and reduce the CO 2 emission. Increasing steam temperature and pressure of such A-USC boilers under consideration require the adoption of Ni based alloys. In the Japanese national project launched in 2008, Ni based alloy HR6W (45Ni-23Cr-7W-Ti, ASME Code Case 2684) is one of the candidate materials for boiler tube and pipe as well as Alloy617, Alloy263 and Alloy740H. The most important issues in A-USC boiler fabrication are the establishment of proper welding process for thick wall components of these alloys and verification of the long term reliability of their weldments. In our previous study, the weldability of HR6W was investigated and the welding process for Ni based thick wall pipe was established with the narrow gap HST (Hot wire Switching TIG) welding procedure originally developed by Babcock-Hitachi K.K. In this paper, creep rupture strengths of HR6W weldment were verified by the long term test up to 60,000 hours for tube and 40,000 hours for pipe. In Japanese national project, narrow gap HST welding process was also applied to the welding test for the other Ni based candidate pipe materials. Furthermore, as the practical A-USC boiler manufacturing trials, header mockup test was conducted and qualified for HR6W.

Continuous and active works have been going to develop 700°C A-USC (Advanced Ultra Super Critical) power plants in Europe, United States and also Japanese national project has launched in 2008. In this new Japanese project Fe-Ni based alloy HR6W (45Ni-24Fe-23Cr-7W-Ti) is one of the candidate materials for boiler tube and pipe as well as Ni based alloys such as well-known Alloy617, Alloy263 and Alloy740. The most important issue in boiler fabrication is the welding process of these alloys and long-term reliability of their weldments. Authors investigated the weldability of HR6W thick-wall pipe. The integrity of the weldment was confirmed with metallurgical investigation, mechanical testing and long term creep rupture test. It is proved that the narrow gap HST welding procedure can meet the requirements for Ni based or Fe-Ni based alloys and provides excellent strength properties.

To enhance the efficiency of computational experiment covering all links of a technological chain ‘generation of plasma jet – injection of particles – formation of dust-laden plasma jet – coating deposition from drops of a melt’ it is very attractive to integrate the experimentally tested analytical solutions characterizing splats formation along with 2-D/3-D models describing dust-laden technological flow. The authors of the present paper carried out a computer simulation of a plasma spraying process from zirconia particles injection to a coating formation conducted by integrating particle-laden plasma flow, metal oxide splat formation and coating formation models with reference to the thermal barriers. The velocity and temperature of both plasma flow and zirconia particles under an applied RF electromagnetic field were clarified by using the first model. Radial distributions of particle impact location, velocity and temperature were obtained based on both an unsteady effect of a plasma flow and distributions of particle size and injection velocity. Secondly, splat thickness and diameter after zirconia droplets impact onto substrate were clarified by using the earlier experimentally probated analytical solution. Finally, the coating thickness distributions were evaluated by using the last model. Abstract only; no full-text paper available.

This paper focuses on the key properties of newly developed high-strength, heat-resistant steels for application in ultra-supercritical (USC) boilers. For some ferritic steels, improvements made to enhance their resistance to steam oxidation are highlighted. The latest welding techniques employed for these steels are introduced. Additionally, the high-temperature strength and weldability of Alloy 617 (52Ni-22Cr-13Co-9Mo-Ti-Al), a potential candidate material for the next generation of 700°C USC boilers, are described. The paper provides insights into the materials and welding technologies crucial for the development of advanced USC boilers operating at higher temperatures.

Numerical simulation of a plasma spraying process from ceramic particle injection to a coating formation was conducted by integrating particle-laden plasma flow, ceramic splat formation and coating formation models. Velocity and temperature of both plasma flow and ceramic particles under an applied RF electromagnetic field were clarified by using the first model. Radial distributions of particle impact location, velocity and temperature were obtained based on both an unsteady effect of a plasma flow and distributions of particle size and injection velocity. Nextly, splat thickness and diameter of melted ceramic particles after impact on a substrate were clarified by using the particle impact velocity and temperature. Radial distributions of splat thickness and diameter became more uniform. Finally, coating thickness distributions were evaluated by using the last model. They were strongly influenced by particle size and injection velocity distributions.