In order to clarify the bonding mechanism and to control the quality of cold-sprayed coatings, it is necessary to accurately measure the in-flight velocity and impact velocity of a projectile. In this study, the in-flight velocity of an aluminum alloy (A2017) 1 mm sphere shot from a small two-stage light gas gun was measured as being 1 km/s using a laser-cut velocity measurement technique. So as to estimate the impact velocity of the projectile, the projectile was caused to impact targets made of aluminum (A1050), copper (C1012), mild steel (SPCC), and stainless steel (SUS304). After the impact tests, the impact crater shapes of the targets was measured using scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy (EDS), and laser microscopy. The impact velocity of a projectile was estimated from obtained crater depth of the targets. In addition, microstructures of the interface between projectile and target were analyzed by EDS, electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM).