In this work, energy-filtered TEM nano-beam diffraction (NBD) technique was used to evaluate channel strain profile in pMOS transistors suffering low Idsat issue. TEM and EDX analysis showed nickel deep diffusion into embedded SiGe source/drain. Such defect not only led to leakage current from S/D to substrate but might also reduce compressive strain induced to channel by eSiGe. Comparison of channel-direction strain between bad and good samples using NBD confirmed strain relaxation in bad sample which explained low Idsat as a result of reduced holes mobility.

In this paper, we describe automated FIB for TEM sample preparation using iFast software on a Helios 450HP dual-beam system. A robust iFast automation recipe needs to consider as many variables as possible in order to ensure consistent sample quality and high success rate. Variations mainly come from samples of different materials, structures, surface patterns, surface topography and surface charging. The recipe also needs to be user-friendly and provide high flexibility by allowing users to choose preferable working parameters for specific types of samples, such as: grounding, protective layer coating, milling steps, and final TEM lamella thickness/width. In addition to the iFast recipe, other practical factors affecting automation success rate are also discussed and highlighted.

In this paper, we report an advanced sample preparation methodology using in-situ lift-out FIB and Flipstage for tridirectional TEM failure analysis. A planar-view and two cross-section TEM samples were prepared from the same target. Firstly, a planar-view lamellar parallel to the wafer surface was prepared using in-situ lift-out FIB milling. Upon TEM analysis, the planar sample was further milled in the along-gate and cross-gate directions separately. Eventually, a pillar-like sample containing a single transistor gate was obtained. Using this technique, we are able to analyze the defect from three perpendicular directions and obtain more information on the defect for failure root-cause analysis. A MOSFETs case study is described to demonstrate the procedure and advantages of this technique.

This paper illustrated the beauty of AFP nano-probing as the critical failure analysis tool in localizing new product design weakness. A 40nm case of HTOL Pin Leakage due to Source/Drain punch-through at a systematic location was discussed. The root cause and mechanism was due to VDS overdrive testing issue. This paper placed a strong emphasis on systematic problem solving approach, deep dive and use of right FA approach/tool that are essentially critical to FA analysts in wafer foundry since there is always minimal available data provided. It would serve as a good reference to wafer Fab that encountered such issue.

With the evolution of advanced process technology, failure analysis is becoming much more challenging and difficult particularly with an increase in more erratic defect types arising from non-visual failure mechanisms. Conventional FA techniques work well in failure analysis on defectively related issue. However, for soft defect localization such as S/D leakage or short due to design related, it may not be simple to identify it. AFP and its applications have been successfully engaged to overcome such shortcoming, In this paper, two case studies on systematic issues due to soft failures were discussed to illustrate the AFP critical role in current failure analysis field on these areas. In other words, these two case studies will demonstrate how Atomic Force Probing combined with Scanning Capacitance Microscopy were used to characterize failing transistors in non-volatile memory, identify possible failure mechanisms and enable device/ process engineers to make adjustment on process based on the electrical characterization result. [1]

High gate to source/drain (S/D) leakage was observed at both failed pins and ET structures with random failure signatures. Detailed TEM failure analysis revealed an abnormal thin Nitrogen-rich nitride layer along the poly gate which extended to the S/D regions. Along the abnormal nitride layer, appreciable Arsenic (As) segregation occurred. The segregated As dopants at these interfaces may form a continuous conducting path, accounting for the gate to S/D leakage mechanism. The preferable As segregation at the Silicon nitride interface may be related to a vacancy-assisted As diffusion process.