Coatings are an essential part of the materials system to protect the turbine blades from oxidation and corrosive attack during service. Inter-diffusion of alloying elements between a turbine blade substrate and their coatings is a potential concern for coated turbine blades at ever increasing operating temperatures because this can cause the formation of undesirable Secondary Reaction Zones (SRZs), which may degrade the mechanical properties of coated Ni-based superalloys. Understanding the effects of each element on the SRZ formation is essential in order to understand both the mechanism and inter-diffusion behaviour between coatings and substrates. In this research, a number of simpler aluminized ternary Ni-Al-X (where X is Co, Cr, Re, Ru or Ta) alloys were investigated in order to elucidate the separate effects of each element on the microstructural evolution, especially at the coating/substrate interface. The aluminized ternary alloys developed distinctive diffusion zones, depending on the third alloy element, ‘X’. Specifically, it has been found that both Ni-Al-Re and Ni-Al-Ta alloys developed a continuous SRZ-like diffusion layer. This diffusion zone persisted in the Ni-Al-Re alloys after high temperature exposure, indicating that Re has a stronger effect on SRZ formation than Ta.

In order to identify means to improve plasma spray consistency, various modifications to the design of a commercial plasma torch nozzle have been investigated. The modifications consist of preparing anode inserts with grooves in the axial direction (spline insert), and introducing a fraction of the plasma gas through a ring of micro-nozzles surrounding the anode nozzle (micro-jet ring). Different designs for each modification have been investigated, and these modifications have also been paired with a modified upstream gas injector. For each of the modified designs, a wide range of characteristics have been measured for the arc, the plasma jet, the in-flight particles and the coating. The results show that most nozzle modifications lead to higher particle velocities and temperatures. The plasma jet is significantly elongated by using some of the modified nozzles, and the cold gas entrainment somewhat reduced. The arc voltage and the luminosity fluctuations are little affected by the nozzle modifications, however, the modification of the gas injector does change the frequencies of the fluctuations. Each of the nozzle modifications can be easily implemented offering an economical way to enhance process reliability.