This paper reports on a study to investigate the creation of a mixed microstructure consisting of proeutectoid ferrite, bainite, and austenite in a medium carbon high silicon steel. The microstructure was produced through the use of a continuous cooling process at a moderate cooling rate from the austenitizing temperature range to room temperature. The investigation also examined the influence of this microstructure on the mechanical properties of the material. Test results indicate that the developed steel has better mechanical properties compared to commercially available dual phase steels.

Austempered Ductile Cast Iron (ADI) has emerged as an important engineering material in recent years. It has a combination of high strength, good ductility, good fatigue strength and fracture toughness. Because of these excellent properties, it is now extensively used in many structural applications such as automotive components, earth moving machineries etc. An investigation was carried out to develop ADI with a nano scale microstructure. This was achieved by high temperature deformation and subsequent austempering of ductile cast iron. The effect of processing parameters such as deformation temperature, strain rate, austempering temperature and austempering time on microstructural features such as volume fraction of phases, size and distribution of phases were examined.