The oxidation of a NiCr bond coat during air plasma spraying was controlled by designing a gas shroud system that attached to the plasma torch nozzle. Two nozzles, termed as “normal” and “high speed” nozzles examined the effect of nozzle internal design on the microstructure and phase structure of coatings. X-ray diffraction and SEM morphologies showed that the shroud system reduced the oxidation of NiCr particles during the spray process. Compared with conventional air plasma spraying, the argon gas shroud reduced the coating hardness because the volume fraction of partially melted particles increased. The high speed nozzle reduced the oxidation and hardness of NiCr coatings due to the increase of partially melted particles in the coatings.

Thermal spray coatings are comprised of millions of heated particles that are driven at high velocity to impact against a substrate; thereby building up to form a consolidated coating. Thus, investigating single solidified droplets contributes to fundamental understanding of coating evolution and their properties. In this study, Scanning Electron Microscopy (SEM) studied the splat morphology of flame sprayed ethylene methacrylic acid (EMAA) with respect to the stand-off distance when deposited onto glass and mild steel substrates. A splat shape transition from a “splash” to a “disc shape” was observed. The morphology of EMAA droplets can be described as a ‘splash splat’ when sprayed onto mild steel at room temperature, whereas a 35 cm stand-off distance produced a disk-shaped splat when the polymer was deposited onto a glass substrate.