The phase transformation model is coupled with the inverse heat conduction problem (IHCP) to estimate the steel/quenchant interfacial heat flux. Cylindrical steel probes having section thicknesses 25 and 50mm, respectively, and lengths 30mm were made from medium and high carbon steels (AISI 1045 and 52100). The probes were quenched in mineral, neem, and sunflower oils. The cooling curves at the centre and near the surface of steel probes were recorded. The near-surface cooling curve was used as a reference temperature data in the IHCP algorithm for the estimation of surface heat flux, whereas the cooling curve at the centre was used as the boundary condition of the axisymmetric model of the probe. The effect of phase transformation on the metal/quenchant interfacial heat flux was indicated by a kink and rise of heat flux. The increase in the section thickness of the probe from 25 to 50mm decreased the magnitude of the heat flux. Increasing section thickness increases the phase transformation, increasing the resistance to heat flow at the metal/quenchant interface.

This paper presents the results of a study on the cooling performance of hot oil and molten salt quench media. It describes the tests performed, analyzes the results, and interprets the findings. It explains how the heat extraction mechanism in hot oil differs from that of NaNO2 eutectic mixtures and how it translates to differences in cooling rate, spatial uniformity, and hardness in quenched steel parts.