Zirconium metal coatings applied by plasma spraying and electrospark deposition (ESD) have been investigated for use as diffusion barrier coatings on low enrichment uranium fuel for research nuclear reactors. The coatings have been applied to both stainless steel as a surrogate and to simulated nuclear fuel uranium-molybdenum alloy substrates. Deposition parameter development accompanied by coating characterization has been performed. The structure of the plasma sprayed coating was shown to vary with transferred arc current during deposition. The structure of ESD coatings was shown to vary with the capacitance of the deposition equipment.

The development of beryllium first wall components for future magnetic confinement fusion experiments such as the International Thermonuclear Experimental Reactor (ITER) is a topic of great importance as the ITER construction phase is about to begin. The beryllium components must be able to survive the harsh plasma environment for extended periods of time during operation. Furthermore, cost and detrimental health effects must be kept to a minimum during the fabrication and operation processes. The work described here details the requirements for ITER first wall components and describes experiments to produce beryllium high heat flux components by plasma spray deposition. Experimental parameters and characterization results from the components are presented. Results of initial high heat flux testing under electron beam irradiation show performance exceeding that required for ITER first wall components.

Plasma spraying was used to produce continuously graded and layered structures of molybdenum disilicide and alumina. These microstructures were achieved by manipulating the powder hoppers and plasma torch translation via in-house created computer software. The resultant microstructures sprayed uniformly and were crack free. The mechanical and thermal performance of these sprayed materials will be evaluated through C-ring tests and thermal cycling experiments respectively. The purpose of this study is two fold; firstly to demonstrate the ability of produce such composite ceramic microstructures using a conventional plasma spraying process, and secondly to quantify the improvements in thermo-mechanical performance provided by these composite microstructures over conventional monolithic microstructures.

Transferred-arc cleaning is being investigated as a solvent-free cleaning method for various metallic substrates. With the recent increase in attention given the hazards involved in the storage, use and disposal of organic solvents, cleaning methods which promise comparable cleaning effectiveness with reduced hazards are being sought. Transferred-arc cleaning of tungsten substrates has been studied to identify the effect of processing conditions on cleaning and roughening characteristics. A Box-Behnken response surface designed experiment varying the chamber pressure, substrate standoff distance and plasma torch arc current while observing the transferred-arc voltage, current, surface cleanliness and surface roughness was performed. The results of the analysis show the effect of the various independent variables on the measured responses. Particular difficulties in roughening tungsten are due to its exceptionally high arc voltage for metal arc attachment. The results presented here provide an enhanced understanding of the arcing properties of various cathode materials. Such information is useful in obtaining the desired cleaning and/or roughening of the substrate.

The intermetallic compound, molybdenum disilicide (MoSi2), is being considered for high temperature structural applications because of its high melting point and superior oxidation resistance at elevated temperatures. The lack of high temperature strength, creep resistance and low temperature ductility has hindered its progress for structural applications. Plasma spraying of coatings and structural components of MoSi2-based composites offers an exciting processing alternative to conventional powder processing methods due to superior flexibility and the ability to tailor properties. Laminate, discontinuous and in situ reinforced composites have been produced with secondary reinforcements of Ta, Al203, SiC, Si3N4 and Mo5Si3. Laminate composites, in particular, have been shown to improve the damage tolerance of MoSi2 during high temperature melting operations. A review of research which has been performed at Los Alamos National Laboratory on plasma spraying of MoSi2-based composites to improve low temperature fracture toughness, thermal shock resistance, high temperature strength and creep resistance will be discussed.

The use of MoSi 2 as a high temperature oxidation resistant structural material is hindered by its poor elevated temperature creep resistance. The addition of second phase Si 3 N 4 holds promise for improving the creep properties of MoSi 2 without decreasing oxidation resistance. The high temperature impression creep behavior of atmospheric plasma sprayed (APS) and hot pressed (HP) MoSi 2 /Si 3 N 4 composites was investigated. Values for steady state creep rates, creep activation energies, and creep stress exponents were measured. Grain boundary sliding and splat sliding were found to be the dominant creep mechanisms for the APS samples while grain boundary sliding and plastic deformation were found to be the dominant creep mechanisms for the HP samples.

MoSi 2 provides good high temperature oxidation and corrosion resistance. However, the lower silicides such as MosSis do not provide such resistance. In this study, atmosphereic plasma sprayed (APS) MoSi 2 particle temperatures and velocities were measured under various torch conditions chosen to span the majority of typically utilized spray parameters. Empirical models of particle temperature and velocity were computed from the data. Three spray conditions were chosen to produce high, medium and low particle temperatures and velocities. Coatings produced under these spray conditions were characterized by profile tracing, quantitative x-ray diffraction, and SEM analysis. The Mo 5 Si 3 level in the coatings ranged from 5% to 8% while the Mo 5 Si 3 level in the starting powder was 0.6%. Particle size, particle trajectory, and torch parameters were found to be important factors in the Si loss process when APS depositing MoSi 2 .

Plasma spraying is under investigation as a method for in-situ repair of damaged beryllium and tungsten plasma facing surfaces for the International Thermonuclear Experimental Reactor (ITER), the next generation magnetic fusion energy device, and is also being considered as a potential fabrication method for beryllium and tungsten plasma-facing components for the first wall of ITER. Investigators at the Los Alamos National Laboratory's Beryllium Atomization and Thermal Spray Facility have concentrated on investigating the structure property relationship between the as-deposited microstructures of plasma sprayed beryllium coatings and the resulting thermal properties of the coatings. In this study, the effect of the initial substrate temperature on the resulting thermal diffusivity of the beryllium coatings and the thermal diffusivity at the coating/beryllium substrate interface (i.e. interface thermal resistance) was investigated. Results have shown that initial beryllium substrate temperatures greater than 600°C can improve the thermal diffusivity of the beryllium coatings and minimize any thermal resistance at the interface between the beryllium coating and beryllium substrate.