While the water vapor content of the combustion gas in natural gas-fired land based turbines is ~10%, it can be 20-85% with coal-derived (syngas or H 2 ) fuels or innovative turbine concepts for more efficient carbon capture. Additional concepts envisage working fluids with high CO 2 contents to facilitate carbon capture and sequestration. To investigate the effects of changes in the gas composition on thermal barrier coating (TBC) lifetime, furnace cycling tests (1h cycles) were performed in air with 10, 50 and 90 vol.% water vapor and in CO 2 -10%H 2 O and compared to prior results in dry air or O 2 . Two types of TBCs were investigated: (1) diffusion bond coatings (Pt diffusion or simple or Pt-modified aluminide) with commercially vapor-deposited yttria-stabilized zirconia (YSZ) top coatings on second-generation superalloy N5 and N515 substrates and (2) high velocity oxygen fuel (HVOF) sprayed MCrAlYHfSi bond coatings with air-plasma sprayed YSZ top coatings on superalloy X4 or 1483 substrates. In both cases, a 20-50% decrease in coating lifetime was observed with the addition of water vapor for all but the Pt diffusion coatings which were unaffected by the environment. However, the higher water vapor contents in air did not further decrease the coating lifetime. Initial results for similar diffusion bond coatings in CO 2 -10%H 2 O do not show a significant decrease in lifetime due to the addition of CO 2 . Characterization of the failed coating microstructures showed only minor effects of water vapor and CO 2 additions that do not appear to account for the observed changes in lifetime. The current 50°-100°C de-rating of syngas-fired turbines is unlikely to be related to the presence of higher water vapor in the exhaust.

In order to assist in developing mechanistic and computational models for understanding the performance of current Fe-base waterwall tubing, characterization has been performed on three field-exposed low alloy steel waterwall tubes. The waterside oxide thickness was characterized using standard metallographic techniques. Alloy and oxide chemical composition was characterized using electron microprobe analysis. Waterside scale thickness was measured as a function of location. Agreement between the measured and predicted values based on likely rate constants was poor.