Lithium-ion batteries have high energy efficiency and good cycling life and are considered as one of the best energy storage device for hybrid and/or electrical vehicle. Still, several problems must be solved prior to a broad adoption by the automotive industry: energy density, safety and costs. To enhance both energy density and safety, the current study aims at depositing binder-free cathode materials using inductively-coupled thermal plasma. In a first step, lithium iron phosphate LiFePO 4 powders are synthesized in an inductively-coupled thermal plasma reactor and dispersed in a conventional polyvinylidene fluoride (PVDF) binder. Then, binder-free LiFePO 4 coatings are directly deposited onto nickel current collectors by solution precursor plasma spraying (SPPS). These plasma-derived cathodes (with and without PVDF binder) are assembled in button cells and tested. Under optimized plasma conditions, cyclic voltammetry shows that the electrochemical reversibility of plasma-derived cathodes is improved over that of conventional sol-gel derived LiFePO 4 cathodes. Further results related to the substitution of iron with manganese in the SPPS precursors (LiMPO4, where M = Fe or Mn) are discussed.

The synthesis of nanoscale particles has received considerable attention because of the potential for new materials and unique properties. The novel properties and the numerous applications of nanophase materials, especially ceramic nanopowders, have attracted many scientists and engineers to invent and explore the preparation methods of ceramic nanoparticles. Induction plasma is used to synthesize cathode materials for fuel cells. Solid oxide fuel cells (SOFCs) are very promising energy conversion systems. SOFCs are based on an oxide-ion conducting electrolyte and they offer a clean, low-pollution technology to electrochemically generate electricity at high efficiencies. These fuel cells provide many advantages over traditional energy conversion systems including high efficiency, reliability, modularity, fuel adaptability, and very low levels of SOx and NOx emissions. It has been found that La1-xSrxMO3-d, (M= Fe, Co etc) are perovskite materials widely considered as the Intermediate Temperature SOFC cathode materials of choice. In particular, La0.6Sr0.4Co0.2Fe0.8O3-δ is extensively used for IT-SOFCs because its thermal expansion coefficient is relatively close to that of the common electrolytes. In this paper, the nanopowders of SOFC cathode materials were synthesized by thermal plasma spray technique. The results of their structure, morphology and particle size distributions will be presented. Abstract only; no full-text paper available.