Novel synthesis of thermal spray grade silicon carbide (SiC) feedstock powder is necessary to allow deposition of this material using atmospheric plasma spraying (APS) method. SiC particles with average size of 1.0 µm are treated using co-precipitation techniques to deliver yttrium aluminum garnet (YAG) binder from its solution precursor as a nano-film onto SiC particles surface. The YAG nano-film will protect SiC core from direct interaction with plasma jet thus hindering their decomposition as well as providing matrix phase within the SiC particles vicinities. The modified SiC particles are sintered and crushed and then sieved to separate 25-45 µm and 45-90 µm size powders, which are then plasma sprayed to deposit SiC coatings of about 300 µm in thickness. Both the feedstock and the coatings were analyzed and compared with regards to their phase composition and microstructures.

Thermal spraying of pure SiC is difficult due to decomposition issues at elevated temperatures. However, the development of suspension plasma spray opens a new path to investigate the deposition of this material since the liquid carrier can hinder this phenomenon. The present work investigates a new route for producing SiC submicron structured coating by suspension plasma spraying (SPS). Classical SiC manufacturing routes using suspension (i.e: spray drying, tape casting) are studied regarding their feasibility to be used on suspension plasma spraying. Aqueous-based suspensions containing 10 wt.% SiC powder (0.60 µm) along with sintering additives are dispersed and stabilized. Both suspensions are sprayed on martensitic stainless steel substrate (AISI 440C) to achieve finely structured and dense coatings. Digital image analysis, X-ray diffraction and scanning electron microscopy are utilized to characterize the coating microstructures. Their dependency on suspension characteristics and spray operation parameters are discussed with respect to the final coating performance.