As consumers embrace Electric Vehicle (EV) technology, the automotive industry is moving quickly into replacing internal combustion engines (ICE) and traditional transmissions. The change to electrically driven vehicles offers new challenges to the gear manufacturing world, and most importantly new specifications to heat treat these gears - specifically quieter gear sets and higher torque ratings. Today’s EVs have a much lower tolerance for noise from the gear set to power the vehicle; therefore, this continues the need for even quieter and stronger gears. This technical presentation will illustrate the heat treat and distortion specifications for these new gears, along with answering the “why” of selecting low pressure vacuum carburizing (LPC) for new programs around the world.

Low pressure carbonitriding and pressurized gas quenching heat treatments were conducted on four steel alloys. Bending fatigue tests were performed, and the highest endurance limit was attained by 20MnCr5+B, followed by 20MnCr5, SAE 8620+Nb, and SAE 8620. The differences in fatigue endurance limit occurred despite similar case depths and surface hardness between alloys. Low magnitude tensile residual stresses were measured near the surface in all conditions. Additionally, nonmartensitic transformation products (NMTPs) were observed to various extents near the surface. However, there were no differences in retained austenite profiles, and retained austenite was mostly stable against deformation-induced transformation to martensite during fatigue testing, contrasting some studies on carburized steels. The results suggest that the observed difference in fatigue lives is due to differences in chemical composition and prior austenite grain size. Alloys containing B and Nb had refined prior austenite grain sizes compared to their counterparts in each alloy class.

This paper reviews several recent advancements in high pressure gas quenching technology along with the impact of new higher hardenability steels. With design upgrades and improved gas flow and heat removal, a wider variety of materials, part geometries, and load sizes can now be gas quenched.

The evolution of Low Pressure Vacuum Carburizing in the automotive industry is well embedded in assembly plants with continuous batch loading. This batch loading, which causes a need for high cost WIP (work in progress), can now be reduced with the Low Pressure Vacuum Carburizing furnace equipment being sized to fit into single piece flow line with small batches. This presentation will look into the recent integration of heat treatment for in-line machining cells and the overall influences for the customer to provide equipment for heat treating in-line. These details will be compared to batch or continuous batch heat treatment as we know it today in the automotive industry. High Pressure gas quenching will be illustrated in both in-line and continuous batch integration.

This presentation will discuss data on parts tested in Low Pressure Carburizing using oil and gas quenching. We will present data on metallurgy, distortion and load design to optimize each quenching media. As we know oil and gas quench respond differently, we will explore the evolution of high pressure gas quenching as it exist in today’s market. Low Pressure Carburizing has been growing among OEM’s and now Tier 2 suppliers as well as heat treaters in the Automotive and Aerospace markets. These details should help show the audience that they also can take advantage of the clean environment from Low Pressure Carburizing and just in time processing along with possible distortion control for all their parts currently being atmosphere carburized.