AISI 8620 low carbon steel is widely used due to its relatively low cost and excellent case hardening properties. The nominal chemistry of AISI 8620 can have a large range, affecting the phase transformation timing and final hardness of a carburized case. Different vendors and different heats of steel can have different chemistries under the same AISI 8620 range which will change the result of a well-established heat treatment process. Modeling the effects of alloy element variation can save countless hours and scrap costs while providing assurance that mechanical requirements are met. The DANTE model was validated using data from a previous publication and was used to study the effect of chemistry variations on hardness and phase transformation timing. Finally, a model of high and low chemistries was executed to observe the changes in hardness, retained austenite and residual stress caused by alloy variation within the validated heat treatment process.

The notion that compressive residual stresses can extend the service life of components subject to rolling contact fatigue is well documented. However, the exact nature of the relationship between effective case depth and the residual stress state is not well understood for components with case depths greater than 0.050 in. (1.27 mm). It is expected that compressive residual stresses gradually transition to tensile stresses as case depth increases beyond a threshold value. This study will measure the residual stress state of components with different case depths before and after simulated service in order to determine where the compressive to tensile transition occurs. It will also investigate the role of retained austenite and the effect of strain-induced transformation caused by rolling contact. Residual stress and retained austenite measurements will be conducted using X-ray diffraction.