Alloy 718, widely used for its high-temperature performance in various applications, is being investigated for use in advanced power plants. Driven by the need for efficiency improvements, these plants demand higher temperatures and pressures, putting significant stress on critical components like boiler tubes and turbines. With existing steels and alloys struggling at such high temperatures, researchers are exploring alternatives. New generation plants target steam turbine inlet temperatures of 720°C and pressures of 350MPa, necessitating superalloys for high- and intermediate-pressure rotor sections. The Thermie Advanced project explored the potential of 718 for these applications. A trial rotor disk, forged using advanced processes, underwent a novel heat treatment to enhance microstructural stability and improve creep behavior. Ongoing creep tests exceeding 100,000 hours suggest a potential 50°C increase in the operational limit compared to standard 718. This 12-year research effort holds promise for utilizing 718 in forged components of advanced ultra-supercritical power plant steam turbines, potentially operating up to 700°C.

Research conducted under European COST programs has demonstrated the beneficial role of boron in enhancing the microstructural stability and creep performance of new martensitic steels. The FB2 steel (a 10%Cr steel containing Co and B, without W) emerged as the most promising candidate and was successfully scaled up to a full industrial rotor component by Società delle Fucine. Extensive creep testing, now reaching 50,000 hours, indicates an improvement of 15-20 MPa over Grade 92 at 600°C for 100,000 hours. STEM and X-ray analysis of long-term aged specimens confirmed that boron significantly enhances precipitate stability compared to Grade 91 and 92 steels, validating its role as a creep-strengthening element and stabilizer of carbides and martensitic structure.