To maximize the mechanical properties of Ni-base superalloys, solution heat treatment is essential to sufficiently homogenize the dendritic segregations formed during solidification. To investigate the homogenization behavior during solution heat treatment, a Ni-base single crystal superalloy, TMS-238, was heat treated under various conditions; temperatures ranging from 1573 to 1613 K for times ranging from 2 to 100 h. After solution heat treatment, the average concentrations of Re, an element that exhibits the highest degree of segregation, in dendrite core and inter-dendritic regions were analyzed. From these results, apparent diffusion constants, D app , were determined based on a proposed homogenization model. Obtained D app values were significantly smaller than the diffusion constant of Re in Ni, strongly suggesting that the apparent diffusion coefficients should be obtained experimentally when using the target alloy.

Electron beam melting (EBM) is one of the candidate manufacturing processes for TiAl alloys which have been considered as next generation high-temperature structural materials. The microstructure and mechanical properties of Ti-48Al-2Cr-2Nb (48-2-2) alloy bars fabricated using EBM were investigated, with a particular focus on the effect of processing parameters such as input energy density and building direction. We observed that the microstructure of the alloy bars fabricated using EBM depends strongly on the processing parameters used during the fabrication process of alloy. In particular, the alloy bars fabricated under appropriate processing parameters have a unique layered microstructure composed of duplex regions and equiaxed γ-grain regions (γ bands). Because of their fine microstructure and deformable soft γ bands, the alloy bars with the unique layered microstructure exhibit higher strength and higher ductility at room temperature (RT) than that of cast alloys. In addition, the alloy bars fabricated at an angle between the building direction and the loading axis of 45° show good fatigue properties at RT even without hot isostatic pressing treatment.