Coating porosity is an important parameter to optimize for plasma-sprayed ceramics which are intended for service in molten metal environments. Too much porosity and the coatings may be infiltrated by the molten metal causing corrosive attack of the substrate or destruction of the coating upon solidification of the metal. Too little porosity and the coating may fail due to its inability to absorb thermal strains. This study describes the testing and analysis of tungsten rods coated with aluminum oxide, yttria-stabilized zirconia, yttrium oxide, and erbium oxide deposited by atmospheric plasma spraying. The samples were immersed in molten aluminum and analyzed after immersion. One of the ceramic materials used, yttrium oxide, was heat treated at 1000°C and 2000°C and analyzed by X-ray diffractography and mercury intrusion porosimetry. Slight changes in crystal structure and significant changes in porosity were observed after heat treatments.

Reducing the pore size and pore volume can lead to improved mechanical properties and enhanced corrosion resistance of plasma sprayed thermal barrier coatings. In this work, plasma sprayed 8 wt.% yttria stabilized zirconia coatings were removed from the substrate and machined to obtain 25x5x1 mm test specimens. These specimens were vacuum impregnated with alumina sol, calcined at 873 K for an hour and then heat treated at 1273 K for an hour to produce ceramic impregnated specimens. As-sprayed and impregnated specimens were investigated using optical microscopy, XRD, SEM, mercury intrusion porosimetry and electron microprobe analysis. This technique can impregnate the entire thickness of the specimens. Pores in the as-sprayed specimens were impregnated with α alumina grains, resulting in microstructural variations and reduction of the size and volume of the specimen pores.