The widespread use of additive manufacturing and modern powder-based technologies (thermal spraying, hardfacing, sintering) encourages the search for alternative routes enhancing the development of metal and metal alloy powders. The state-of-the-art powder production processes, like gas, water or plasma atomization, are dedicated to mass production, which limits the availability of new powder compositions with desired characteristics. In this study, stainless steel powders were investigated. The powders were atomized by an in-house developed ultrasonic (UT) atomization set-up, called ULTRAMIZER. In this system, the atomization of melt is possible by using a high-power ultrasonic field. The atomized powders were characterized in terms of morphology and particle size distribution (PSD). The powder features were then correlated with operating parameters of: (i) UT atomization system, mainly frequency and root mean square power (RMS), and (ii) the orientation of the atomization plate against the melting system, by means of distance and tilting angle. The study shows that the ultrasonic atomization allows producing nearly spherical, defect-free powder particles, with a very narrow and controllable size distribution. These are important advantages over other metal powder production methods, especially when it comes to the development of new types of powder.

High-pressure cold spraying has shown significant potential in manufacturing metallic composite coatings for a wide range of industrial applications, including wear and corrosion protection. Quasi-crystalline materials, in turn, are promising candidates due to their unique microstructural features. Combining these concepts, metallic composite coatings were generated using high-pressure cold spraying to produce functional and protective coatings. Several spray trials were done to detect the effect of compositions and size of quasi-crystalline feedstock materials mixed with metal powders, Al6061, and stainless steel 316L, on coating microstructure, integrity, and surface properties. A scanning electron microscope was used to examine the microstructure of the feedstock materials and composite coatings. A 3D surface optical profilometer was also used to investigate surface texture. The wettability of the coating surfaces was measured by static water contact angles using a droplet shape analyzer. Cold-sprayed quasi-crystalline composite coatings showed denser and well-integrated deposits with a random distribution of phases across the composite surface, indicating promising structural reliability and hydrophobic behavior.

Industries developing cold-spray processes aim at producing dense and resistant coatings. Controlling microstructure and inter-particular fracture characteristics of sprayed coatings is essential to improve their properties. To do so, post-spraying heat treatment is a promising approach. This work addresses the development of such heat treatments and focuses on the analysis of recovery and recrystallization. Different heat treatment parameters were explored, namely, holding temperature and time, heating rate, and heating method. This approach revealed a competition between recrystallization and other microstructural evolution mechanisms, such as precipitation and porosity coalescence. An optimized heat treatment, allowing microstructural softening and adequate mechanical properties, was sought after. First, differential scanning calorimetry measurements applied to as-sprayed coatings enabled to identify recovery and recrystallization temperature ranges. Then, a variety of heat treatments was applied, involving long-time isothermal holdings as well as shorter cycles. Microstructure analysis and hardness measurements allowed making a first selection of treatment conditions.

Due to their excellent corrosion resistance, austenitic stainless steels are suitable for surface protection applications. However, the application potential is often limited by the low wear resistance. An interstitial hardening of the surface layer area can solve this problem for massive wrought alloys. Further potential for improvement lies in the transition to surface technology. For this purpose, powder feedstock of the stainless-steel grade AISI 316L was gas nitrocarburized at low temperatures. The formation of a metastable expanded austenitic phase was achieved. Subsequently, the processing was carried out by cold gas spraying. Due to the simultaneously high process kinetics and low thermal load, dense coatings were produced while maintaining the metastable state of the feedstock. When compared to solid reference systems, the scratch resistance saw a marked improvement.

The product quality of selective laser melting (SLM) is closely related to the alloy powder characteristics, including the size distribution and the oxygen content. In this work, the 316L stainless steel powder was prepared by a vacuum atomization furnace and sieved into a normal-sized distribution range from 15 to 53 μm with a median diameter of 37.4 μm, and a fine-sized distribution range from 10 to 38 μm with a median diameter of 18.9 μm. Then they were mixed with each other in different proportions. The results show that, under the condition of the same SLM parameters, the SLM part, with adding a large amount of fine-sized powder, has a lower density and strength, as well as more holes and spheroidized particles, compared with the SLM part with adding a small amount of finer-sized powder. Furthermore, the 316L stainless steel powder with a high oxygen content was prepared by a non-vacuum atomization furnace. Although the 316L stainless steel powder with a high oxygen content can be evenly spread in the SLM process, the surface layer of the powder is easy to form an oxide film during the cooling and solidification of powder inside the molten pool. Under the action of thermal stress, the small crack forms and expands along the oxide film, eventually leading to large cracks inside the melt channel.

In this study, two sizes of iron and stainless steel powders were binarily mixed into four groups with different weight percent fractions and the various mixtures and single-component powders were cold sprayed onto aluminum substrates. The deposition efficiencies (DE) of the powder mixtures and single-component powders were measured and are compared. The results show that the four binary mixtures exhibit different DE characteristics as a function of stainless steel wt% and that the small size mixtures have higher DE relative to the single-component iron powder. The difference is explained by particle-particle interactions (tamping and retention) that occur upon impact and only in the small size mixtures. The study also finds that changing spray parameters, such as feed rate, stand-off distance, gun travel speed, and gas temperature and pressure, has no effect on particle-particle interactions.

In this work, a 2D axisymmetric model of gas atomization at unsteady state that accounts for break-up and solidification is used to simulate laser melting of gas atomized powder. With an optimal nozzle width of 0.6-1 mm and a nozzle angle of 30-32°, the yield of fine 15-45 μm stainless steel powder, suitable for selective laser melting, is shown to increase from 20% to 35%. The effect of laser power on the melting channel width, microstructure, and mechanical properties of the sample is also investigated.

In this study, 43 μm 316L stainless steel and 23 μm commercial purity Fe feedstocks were used. The following coatings were made by cold spray: single component 316L, Fe, and their binary composites with nominal compositions of 20 wt.% Fe (20Fe), 50 wt.% Fe (50Fe) and 80 wt.% Fe (80Fe). The coatings were characterized (microstructure, flattening ratio, composition) and the cold sprayability metrics (DE, porosity, coating cohesion strength) were analyzed. Results show that the single component 316L coating has a much better DE and coating cohesion strength, and a slightly lower porosity as compared with the Fe coating, whereas all the composite coatings have the similar cohesion strength. Moreover, the 20Fe coating features the highest porosity and the lowest DE; 50Fe coating features the lowest porosity; and the 80Fe coating features the highest DE. To characterize the feedstock mixture composition, in addition to the usual approach of weight or volume fraction, the ratio of the 316L and Fe particle numbers in a mixture (i.e. particle number fraction), was calculated. Using this metric, the effects of the feedstock mixing composition on the cold sprayability of bimodal size 316L/Fe powder mixtures can be better explained.

Plasma spheroidization utilizing a plasma spray gun has been demonstrated for water-atomized stainless steel SUS316L powder. The angular particles were successfully spheroidized, and the D50 size of particles were decreased from 35 μm to 24 μm with 9 kW of processing power and to 15 μm with 17 kW of processing power. It was found that the high processing power of 17 kW generates a significant number of fine particles with the size of under 1 μm. By contrast, the powder formed on low processing power of 9 kW has better flow-ability and low cohesiveness, suggesting that an appropriate processing power exists to form the spherical powder suited for additive manufacturing

In this work, single component 316L and Fe coatings, as well as mixed 316L/Fe coatings with a dual powder feeder to obtain various feedstock compositions, were deposited to measure the deposition efficiency (DE). Individual particle impact tests were performed on single component and composite coatings to understand the particle impact behaviors during deposition. Bond ratio (BR) were determined for the impact tests to correlate with the DE. Results show that the 316L powder has a better DE than Fe, whereas the DE of the mixed 316L/Fe powders increases with increasing feedstock Fe content. The BR results correspond well with the DE of single component powders and mixed powders. The BR of 316L impacts onto composite coatings decreases with increasing Fe content, while the BR of Fe impacts plateaus at a high value regardless of composite coating composition, which leads to the increase of overall mixture DE.

In this study, stainless steel powder is mixed with commercially pure iron and cold sprayed on steel in order to produce a metal composite with controlled properties. For these composites, porosity is very low, and annealing at 600-1100°C for an hour reduces it further. Annealing also sinters interparticle interfaces, leading to vastly improved fracture properties. Fully annealed single-component stainless steel exhibits a much higher strength than annealed CP iron, but adding just 20% stainless steel to iron produces a composite with the same fully annealed strength as that of stainless steel.

In this investigation, particle image velocimetry (PIV) and direct imaging are used to measure particle velocities during cold spraying. Four feedstock powders were sprayed, including Ni, WC-Co, carbonyl Fe, and Cr steel. Multiple exposures at 500 ns intervals were used to measure in-flight particle velocities via direct imaging with a high shutter speed camera. Velocimetry measurements were made with a double-pulse laser and a high-resolution camera. With the minimum frame straddling time set to 100 ns, a maximum particle velocity of 1052 m/s was measured.

Cold spray processing of stainless steel coatings, which represent a cost-effective method for wear and corrosion resistance, has been demonstrated as technically feasible. However, these coatings have very low tensile strength in the as-sprayed condition and may also exhibit a marginally higher wear rate. In this study, the cold spraying of 316L stainless steel coatings was investigated to assess the effect of powder size distribution and post-spray heat treatment on strength and wear properties. Coatings on aluminum and steel substrates were produced with a feedstock powder obtained in three particle size distributions. All coatings were deposited under the same conditions using nitrogen as the propellant gas, and then annealed at the optimum temperature. The microstructure and mechanical properties of both as-sprayed and heat-treated coatings were evaluated and the results are presented in the paper.

Thermal spraying (APS and HVOF) of an agglomerated nanostructured powder, based on the composition of a commercial martensitic steel, is introduced. The nanostructure of the produced powder is examined by means of microscopy and X-ray diffraction. The influence of the two different processes on crucial properties such as porosity, microhardness, adhesion, and wear resistance is studied. High wear resistance is noted for both coatings. The HVOF coating, especially, showed better wear performance in comparison with the APS coating and the bulk martensitic steel. The superiority of the HVOF coating over the APS coating regarding the aforementioned properties is attributed to a higher retention of the nanostructure of the starting powder, higher peening and relatively low oxidation.

Cold spraying is a new emerging coating technology and has been widely used to produce coatings of various materials. It has been widely accepted that particle velocity prior to impact is one of the most important parameters for the cold spray process, and bonding occurs when the impact velocities of the particles exceed a critical value. As we know, particle velocity is influenced by many parameters, such as nozzle design, particle size, particle morphology, working gas pressure and temperature. In this work, three types of commercial stainless steel powders with different sizes or morphologies were employed to prepare coatings. Their respective particle velocities were also measured. With a non-clogging nozzle developed in Plasma Giken Company, Ltd., the particle velocities can be adjusted by changing the working gas pressures and temperatures to values as high as 4 MPa and 1000°C, respectively. The in-flight particle velocity was monitored via the DPV-2000 system. The results show that the particle velocity was influenced by the working gas pressure, temperature, particle diameter and morphology. Much denser coatings can be obtained with higher particle velocities, and consequently higher micro-hardness values of the coatings can also be achieved.

The conventional high-velocity oxy-fuel (HVOF) process has characteristics of high flame velocity and moderate temperature, and is widely used to deposit cements, metals and alloys coatings such as WC-Co, nickel and stainless steel. In this paper, a high pressure HVOF system with combustion chamber pressure up to 3.0MPa, and with characteristics of higher flame velocity and lower temperature was developed. In-flight particle velocity was measured using the DPV-2000 system at combustion chamber pressures from 1.0 to 3.0MPa, and stainless steel 316L powder was deposited at a combustion chamber pressure of 3.0MPa. The influence of spray conditions on the coating microstructure, deposition efficiency and micro-hardness were investigated. It was shown that the combustion chamber pressure has significant influence on particle velocity. Dense coatings composed of unmolten or partially molten particles could be deposited by varying the spray parameters. In the experiment, deposition efficiency up to 90% was achieved at the optimized spray conditions.

Tungsten-based cermets are well-known engineering materials finding applications in aerospace, nuclear equipment, and many other fields. Plasma spraying is an interesting industrial process to manufacture those refractory materials. Original plasma sprayed hard coatings for wear protection composed of a stainless steel matrix and inclusions of tungsten carbide (WC) nanoparticles were developed. To built-up the coatings, two precursors were injected separately in the plasma jet : a stainless steel micrometric powder was classically injected into the plasma jet using a carrier gas whereas WC nanoparticles were injected with a liquid carrier, like in the so-called process suspension plasma spraying. One of the challenges is to maintain the WC phase stoichiometry in the deposit, without decomposing the carbide into brittle W 2 C, W 3 C, and metallic tungsten, phenomenon usually occurring with thermal spraying techniques. Another issue is to succeed in including homogeneously the carbide nanoparticles in a sufficiently dense stainless steel matrix. Coatings with different WC contents were deposited on stainless steel substrates and investigated with respect to their microstructure by optical and scanning electron microscopy, porosity level using the Archimedean method, phase composition by X-ray diffraction and Vickers micro-hardness. Results have shown that coatings consisting of a stainless steel matrix containing inclusions of carbide nanoparticles can be produced by plasma spraying. The phase composition analysis indicated that nanoparticles are largely composed of the WC phase and contain a small amount of WC1-x phases. A slight increase of the porosity level was measured for coatings containing nanoparticles, compared to the pure matrix, probably due to the cooling effect of the WC carrier liquid on the in-flight characteristics of the stainless steel particles. Micro-hardness measurements gave similar values for with or without nano-sized particles, showing that the amount of WC included in the samples was insufficient to improve the hardness property.

To fully understand particle interactions with both substrate and neighboring particles, Finite Element Analysis (FEM) of particle agglomeration impact onto substrate was developed. To investigate particle/particle bonding mechanism, two dimensional models for various initial densities of deposited stainless steel particles has been built. In the model the stainless steel powder was deposited onto copper substrate. The results obtained from simulations show the influence of particle agglomeration density on stress and strain state. Both plastic strains, stresses and dynamics of the process has been investigated. The model was verified and compared with metallographic structures of real coatings.

Plasma spraying with axial powder injection inside the anode nozzle is a method considered to markedly enhance deposition efficiency and reduce plasma power compared to the most general method of injecting powder at the nozzle exit. However, powder injecting inside the nozzle will also likely cause problems from powder deposition on the nozzle wall and clogging of the particle feed channels. In this study, spherical stainless steel 316 and angular alumina powders with a mean size of 20-40 μm are used to deposit coatings via axial powder injection. The effect of powder feed rate, gas flow rate, and plasma power on deposition efficiency and particle clogging are investigated. The results show that particle clogging can be avoided by reducing powder feed rate and increasing the velocity of the plasma jet.

A new cold spray process for a combustion-free spraying is studied experimentally and by modeling and simulation. The high particle velocity at the front of the substrate is achieved by using the shock tube technology. The particles have been injected downstream of the nozzle throat into a supersonic nozzle flow. The shock tube of 6.5 m length and 56 mm inner diameter provides the necessary reservoir conditions for the nozzle flow. The measurements of the particle velocity made by a laser Doppler anemometry (LDA) setup showed that the maximum velocity amounts to 1220 m/s for stainless steel particles of 15 µm diameter. The CFD-Code (Fluent) is first verified by a comparison with available numerical and experimental data for gas and gas-particle flow fields in a long Laval-nozzle. The good agreement implied the great potential of the new dynamic process concept for cold gas coating applications. Then the flow fields in the short Laval nozzle designed and realized by the Shock Wave Laboratory (SWL) have been investigated. The gas flow for experimentally obtained stagnation conditions has been simulated. The gas-particle flow without and with the influence of the particles on the gas flow has been calculated by the Surface Engineering Institute (IOT) and compared with experiments. The influence of the injection parameters on the particle velocities has been investigated as well.