The specific advantages of TiC as a hard material are its low density, high hardness and the high alloyability of the hard phase - binder metal composite. Currently developed agglomerated and sintered core-rim structured TiC-based powders were intensively studied in the last few years for thermal spray coating solutions. In the work described in this paper two different powders with cubic (Ti,Mo)C and (Ti,Mo)(C,N) hard phases and Ni/Co binder, representing the first and second alloying step for the binary TiC-Ni/Co composite, were used together with mechanically mixed NiBSi powder to produce wear resistant coatings by plasma-transferred arc welding (PTA) and laser cladding. Basic process parameters, coating microstructures and properties are described. Coatings with fine grained hard particles were obtained by both processes, while the coating prepared from the nitrogen-containing powder by laser cladding shows a significant smaller hard particle grain size and increased hardness.

High power diode lasers (HPDL) at the level of ? 6 kW are efficient cladding tools in heavy engineering applications where thick (up to 5 mm) wear and corrosion resistant coating layers are required. Large beam geometry makes possible the overlap of thick 20 mm wide cladding tracks side by side without coating defects. Compact size and closed cooling water circulation enable HPDL cladding process to take place also at a site of new or worn high-value machine parts, which have worn in operation or been damaged already during overseas transportation. Instead of moving parts of several tons’ weight, it would be perhaps more cost efficient to transport HPDL cladding unit.

This study investigates the influence of laser cladding parameters on the geometry and composition of metal-matrix composite (MMC) coatings. Composite coatings are made of a Ni-Cr-B-Si metallic matrix and of WC reinforcement with a volume fraction of 50 %. Optical microscopy is used to characterize the coating geometry (height, width and penetration depth) and to determine the real volumetric content of WC. Laser cladding on low carbon steel substrate is carried out using a cw Nd:YAG laser, a coaxial powder injection system and a combination of Taguchi and EM methods to design the experiments. This combination explores efficiently the multidimensional volume of laser cladding parameters. The results, which express the interrelationship between laser cladding parameters and the characteristics of the clad produced, can be used to find optimum laser parameters, to predict the responses and to improve the understanding of laser cladding process.

Multilayer high-speed cladding by injection of a M2 steel powder with 0.82%C, 4.7%Mo, 6.4%W, 4.1%Cr, 2.02%V, 0.3%Mn, as chemical composition, in a melted bath produced using a CO 2 continuous wave laser connected to a x-y-z coordinate table was tested in order to increase the wear resistance and heat stability of tool active surfaces made of 0.45%C steel. Layers made by different laser runs were characterized by macro and microstructure analysis, as well as a phase identification analysis by X-ray diffractometry, micro-hardening analysis and hardness testing on the coated layer surfaces in order to establish the optimal cladding condition. Lathe tools made using this technique showed a good ability to maintain their cutting power during steel shaping.

In order to increase the wear and corrosion resistance of 0.45% C surface steel layers, a multilayer coating was tested by injection of a powder with 8.9% Cr, 4.5% Fe, 5.1% B, 2.4% Al, 0.6% Cu and all remainder of Ni in the melted bath produced using a CO 2 continuous wave laser. To determine the optimal melting regime, the layers obtained by different laser conditions were characterized by macro and microstructure analysis, as well as a phase qualitative analysis by X-ray diffractometry and microhardness analysis.

Plasma Transferred Arc (PTA) welded coatings are used to improve surface properties of mechanical parts. Advantages are the high reliability of the process and the low dilution of substrate and coating material. Processing of surfaces by PTA welding is restricted at the time to flat horizontal position. Furthermore industry is interested in the development of strategies for coating with PTA in constraint position as complex 3-D parts could be then easily processed as well. Under commercial aspects, the process design can be optimized in order to increase process efficiency and to reduce heat input during the welding process. Process optimization involves the determination of guidelines for PTA welding in constraint positions as well. Modelling the process gives an alternative to reduce the experimental effort to optimize the welding process. Results of simulation studies of the PTA welding process will be given in the present work. It will be shown, that coating conditions can be optimized by varying plasma gas flow, heat input and heat flow, process speed or powder injection with regard to welding in constraint positions. The defined controlling of the PTA welding allows to modify process management with less experimental effort and to develop coating strategies for processing in different positions. In experimental investigations the developed coating strategies will be confirmed by producing PTA coatings in constraint position as well as complex 3-D parts.

Plasma transferred arc welding (PTA) is used to produce coating for wear resistance application in earth moving equipment. The coating is designed to have balanced toughness and hardness, optimal microstructure to perform in the wear modes the components are subject to. 4~ 6 times improvement in wear life compared with hardened steel was achieved as demonstrated in dry sand/rubber wheel test and Caterpillar proprietary abrasion wear test

The exceptional properties of beryllium (Be) including low density and high elastic modulus, make it the material of choice in many defense and aerospace applications. However, health hazards associated with Be material handling limit the applications that are suited for its use. Innovative solutions that enable continued use of Be in critical applications while addressing worker health concerns are highly desirable. Plasma Transferred Arc solid freeform fabrication is being evaluated as a Be fabrication technique for civilian and military space based components. Initial experiments producing beryllium deposits are reported here. Deposit shape, microstructure and mechanical properties are reported.