The commonly used method for preparing EBCs is atmospheric plasma spraying (APS), but it has problems such as easy oxidation of the coating, low spraying power, and low substrate temperature, resulting in the coating having multiple pores, cracks, and insufficient density. The new plasma spraying physical vapor deposition (PS-PVD) technology can solve these problems. This article compares the microstructure, mechanical properties, and phase composition of EBCs prepared using APS and PS-PVD processes.

The objective of this study is to optimize thin electric and mechanical functional copper coatings using atmospheric plasma spray by determining the impact of particle temperature and velocity on coating properties. A particular focus is placed on the formation of real contact between the particles within the coating, which is crucial for electrical conductivity while the contact at the interface is essential for adhesive strength.

This study employs an XAI framework to gain insights into Residual Network and Artificial Neural Network models trained on both simulations and experimental data to predict deposition efficiency (DE) in atmospheric plasma spraying (APS). SHapley Additive exPlanations (SHAP), an interpretability framework, was then applied to help identify which process parameters have the most significant influence on the DE and to reveal how changes in specific parameters affect the DE by elucidating their impact on the model predictions.

Thermal spray coatings are typically applied to grit-blasted, rough surfaces, though coating models generally assume smooth substrates. This research involved simulating nickel coating formation on rough stainless-steel substrates in an atmospheric plasma spray process. The researchers evaluated coating topography, porosity, thickness, and roughness using a Monte-Carlo stochastic algorithm. The temperature differential between coating and substrate creates residual thermal stresses, which were analyzed using NIST's Object Oriented Finite element software (OOF). Results indicate that substrate roughness increases coating roughness and creates non-uniform stress distribution with concentration points at the coating-substrate interface.

This study aims to develop strategies for coating free-form surfaces and assess their effectiveness as heating elements. Atmospheric plasma spraying was used to apply heating coatings to samples with various radii. Different coating strategies were evaluated, and their effects on the coating quality (and heating behavior) were analyzed.

In this study, a high-entropy alloy (HEA) powder containing boron (NiCrCuMoB) was developed for atmospheric plasma spraying to produce coatings with minimal oxide formation in the molten droplets. The in-situ deoxidizing effect of boron during flight was investigated by analyzing collected HEA particles. The oxidation behavior of individual splats deposited on polished stainless-steel substrates was also examined. The resulting coating microstructure and mechanical properties were characterized. The results demonstrate that the addition of boron effectively suppresses in-flight oxidation of the molten particles, leading to the production of HEA particles with low oxide content. Consequently, bulk-like HEA coatings exhibiting strong metallurgical bonding and a reduced oxide content were achieved due to the deoxidizing action of boron.

Cold atmospheric plasma spraying is used to produce thin coatings of copper and tin between 20-80 μm thickness for use in diffusion soldering. This study presents an alternative process to apply composite solders directly onto power electronic bare dies. The formation of intermetallic phases may be promoted by the homogeneous distribution of the Cu and Sn particles as they are presented not in a layered structure but as a pseudo alloy within the coating. The Cu and Sn powder is mixed in situ using two powder conveyors, enabling adjustable mix ratios. The presented approach has been shown to produce a homogeneous particle distribution within the coating. Furthermore, preliminary experiments indicate the feasibility of the technology for applications in diffusion soldering.

Surface structures are of vital importance for the wetting behaviors of hydrophobic coatings. In this work, rare earth oxide coatings with different surface structures were deposited via the solution precursor atmospheric plasma spray (SPAPS) process and solution precursor vacuum plasma spray (SPVPS) process, respectively. The SPAPS coatings showed hierarchical cauliflower-like surface structures composed of micron-sized clusters and nanometer-sized particles, while the SPVPS coatings showed relatively flat topographies with small and short bumps. The formation of different surface structures in the SPAPS and SPVPS processes was investigated by modelling the movement of in-flight particles in the vicinity of the substrate. The properties of plasma jets and the characteristics of in-flight particles in the two processes were correlated. The effects of diverted plasma gas flow on the trajectories of particles impinging on the substrate and the resultant surface structures were elaborated, revealing different shadowing effects in the SPAPS and SPVPS processes. The SPAPS coatings were superhydrophobic due to the presence of hierarchical surface structures, which showed larger water contact angles and smaller roll-off angles than the SPVPS coatings. The correlations between the surface structures and wetting behaviors of different coatings were investigated.

The ingestion of siliceous particulate debris into the gas turbine engines during operation caused the deposition of so-called CMAS (calcium-magnesium-alumino-silicate) on the hotter thermal barrier coating (TBC) surfaces. The penetration of these particles into the TBC at temperatures above 1200°C caused the loss of strain tolerance and premature failure of the TBCs. To mimic real-world conditions, a commercially available CMAS precursor dust powder was sprayed onto 8YSZ coatings using an atmospheric plasma spraying process. The substrate temperature was maintained at an average of 1100°C and 525°C during spraying. The effect of the spraying parameters on the deposition, microstructure, and composition of the CMAS coatings was investigated. In addition, to understand the CMAS build-up on the high-temperature surfaces, the CMAS splat formation behavior was also analyzed on the polished samples at temperatures ~1100°C. SEM/EDS analyzes were performed to identify and quantify the elements of the CMAS deposits. It was found that the surface temperature, deposition time, and different nozzles could play a significant role in having different phases of CMAS deposits.

The need for effective electrical insulation coupled with good thermal conductivity in power electronics has led to an exploration of suitable solutions for components like Insulated-Gate Bipolar Transistors (IGBTs). Considering its material properties, AlN emerges as a promising candidate for this application due to its high thermal conductivity, good electrical insulation and ample dielectric strength. However, aluminium nitride (AlN) has a low deposition efficiency when applied by atmospheric plasma spraying (APS). In contrast to AlN, alumina has a very good deposition efficiency during thermal spraying. Feedstock development was conducted to enhance the coating deposition for AlN. Therefore, a parameter study was carried out with AlN feedstock material to form a protective alumina shell around the AlN particles. Subsequently, the heat-treated powder was applied on an aluminium substrate by APS. X-ray diffraction (XRD) analysis displayed that, the heat-treated feedstock material contained AlN and α-Al 2 O 3 phases. It was observed from scanning electron microscopy (SEM) analysis that the AlN particles formed an oxide shell which led to an enhanced deposition efficiency with a high amount of AlN in the coating. The coatings were also investigated by XRD and SEM to prove the presence of AlN and alumina. For the first time, oxide shelled AlN was successfully applied by thermal spraying with sufficient coating deposition and enhanced AlN-content in the coating.

One of the promising thermal barrier coatings (TBC) options for use above 1250 °C has been La 2 Ce 2 O 7 (LC). This work explored the role of dual layered ceramic coatings in the top layer of the TBC system that has been prepared using atmospheric plasma spraying (APS). Above the NiCrAlY bond coat, 8 mol.% yttria stabilized zirconia (8YSZ) coating has been deposited with optimized APS parameters. Over the top layer (8YSZ), another layer that comprises composite with LC and 8 wt.% of 8YSZ (spray dried) has been deposited. Investigations into the hot-corrosion behavior of 8YSZ-LC based TBC subjected to Na 2 SO 4 +V 2 O 5 salt at 950 °C for 4 hours. A porous layer made mostly of LaVO 4 , CeO 2 , CeO 1.66 and YVO 4 was developed on the LC+8wt.% YSZ layer after being subjected to a hot corrosion test in Na 2 SO 4 +V 2 O 5 salt. Dissociation of LC and 8YSZ leads to the formation of new phases, such as CeO 1.66 , CeO 2 , LaVO 4 and YVO 4 as the corrosion by-products in the extreme environment. The findings indicated that delamination has occurred due to the phase transformation, cavities and cracks in the 8YSZ-LC based TBCs. The molten salt's hot corrosion mechanisms of the 8YSZ-LC based TBC are discussed in detail. Further, the potential use of 8YSZ-LC based dual coatings and scope for the future work have been derived from the current study.

Coating adhesion by thermal spraying method requires sufficient surface roughness on particle scale particles impacting the surface, particularly in the case of plasma spraying with particle melting state. Grit blasting process is mainly used to create the fine asperities required for spread particles to adhere. To further increase adhesion, the use of laser texturing for metallic substrates is benefit and is already well documented in literature. In the case of ceramic substrates such as alumina, grit blasting with corundum particles is no longer effective in creating a roughness of a few micrometers. Laser texturing therefore appears to be a potential candidate for generating adhesion in coatings. In this work, adhesion mechanisms of three different coatings produced by Atmospheric Plasma Spraying (APS) on a textured alumina substrate were investigated. The influence of substrate surface texturing by two different laser methods, a pulsed nanosecond laser and a continuous laser, was studied. YSZ was chosen as a potential Thermal Barrier Coating (TBC) and Al 2 O 3 and Y 2 O 3 were selected as bondcoats to observe the variation of adhesion mechanisms on ceramic substrates. Textured patterns and coating microstructures were observed by numerical and electron microscopy. Different adhesion mechanisms occurred depending on coating material. Either the geometrical parameters of the pattern and the surface roughness developed by a nanosecond laser and a continuous laser respectively, can promote mechanical anchoring and thus, a real adhesion.

Carbon fiber (CF) composites are widely used in the aerospace industry due to their light weight and favorable mechanical properties. Nevertheless, applying protective coatings (e.g. erosion resistance) through thermal spraying presents specific challenges with defects such as distortion, oxidation, and poor coating adhesion. This study presents a new technique that combines electroless plating processes and thermal spray for depo-siting metals onto polymer-reinforced composites. Samples of low melting polyaryletherletone (LMPAEK) thermoplastic polymer reinforced with carbon fibers aligned in the normal direction (ZRT film) are plated (with copper, silver, or nickel) to provide an adhesion layer for the thermal spray processes. Subsequently, pure tin and titanium (i.e. Ti-6Al-4V) is deposited on the samples using High Velocity Air-Fuel (HVAF) and atmospheric plasma spray (APS) processes. Cross-sections of the resulting coatings are compared, and the materials are characterized for surface roughness, cracks and pores.

An optimized powder/suspension based atmospheric Plasma Spray (PS) process, using a Triplex Pro 210 TM torch, was implemented to elaborate Cu:TiO2 surface coatings on stainless steel. Nanometric Degussa P25 TM powder was prepared in a water-based suspension and co-sprayed with a Cu spheroidal powder. The bacterial reduction, evaluated with 1h-exposure to Escherichia Coli (E. Coli), was two times higher for the Cu:TiO2 coating compared to the bare stainless steel substrate. Since the coatings obtained by plasma spray are relatively porous, their antibacterial efficacy was compared to smooth Ag and Cu doped titanium nitride (TiN) films obtained by physical vapor deposition technique (PVD). For the same exposure time, the PVD smooth coatings showed a much lower antibacterial efficacy proving the topography effect on bacterial adhesion.

A new challenge in the transport systems concerns with improving efficiency. Thermal swing coatings are interesting candidates for internal combustion engines due to their potential to reduce cooling requirements and increase efficiency. K 2 Ti 6 O 13 (KTO) thermal barrier coatings (TBCs) were prepared by atmospheric plasma spraying through powder structure design and optimization of deposition conditions. The thermophysical properties of plasma-sprayed KTO deposits and their effect on the thermal swing have been investigated. Their thermal conductivities were tested by a laser flash method and the thermal performance of the coatings was further examined by thermal swing test. The phases, nominal chemical compositions and microstructure of KTO deposits were characterized by X-ray diffraction (XRD) and scanning electron microscopy combined with energy dispersive spectrometry (SEM-EDS). The results indicated that the chemical composition change occurs to the coatings resulting in a deviation from nominal stoichiometry due to chemical reactions between the plasma gas and particles. The thermal conductivity of the coating is very sensitive to the coating compositions, and the coating prepared using porous powder under pure argon presents a single K 2 Ti 6 O 13 phase and high porosity, and the lowest thermal conductivity of 0.85 W/m·K.

The application of thermally sprayed coatings on CFRPs has gained great interest to enhance thermal and tribological properties and several processes have been optimized. However, for the coating of internal surfaces of tubes there is no sufficient technical solution. This paper introduces a novel and unique process technique for coating the internal surfaces of CFRP tubes using the transplantation of thermally sprayed coatings. A negative shape tube with defined surface and material properties was used as a mandrel and coated using atmospheric plasma spraying (APS). The CFRP was then produced using filament winding onto the coating, and after curing, the specimen was separated from the mandrel. With this process innovation, CFRP tubes with internal ceramic or metallic coatings can be produced without any thermal degradation of the polymeric matrix or damage to the carbon fibers. Compared to conventional coating methods, this novel process technique has several advantages. It allows for the production of internal coatings with low roughness of R z = 10 μm as sprayed without post-processing. The specimens also have a significantly lower tendency to corrode compared to conventional coated CFRPs. A high adhesion strength of the coatings of 15.9 MPa was achieved and the hardness of the internal ceramic coating is 918 HV0.1

With an increasing demand for lower fuel consumption of different means of transportation, the demand for lightweight construction materials is rising. In this frame, usually metallic parts can be replaced by components consisting of fiberreinforced plastics. On the other hand, the components lose their electromagnetic field (EMF) shielding properties, which are required for many applications such as housings for electrical components. This issue can be solved by applying electrically conductive foils or meshes, often by a manual process that increases the time of production and process. In this publication, the application and parameter influence of thermally sprayed electrically conductive coatings for EMFshielding applications is discussed. Laser structuring is used as a novel surface preparation process, for the subsequent thermal spray process. The influence of the used laser-parameters is discussed accordingly. The coatings are applied by the wire-arc spray with Zinc feedstock as well as the atmospheric plasma spray (APS) process with Copper feedstock. It was found that coating properties such as adhesion strength, EMF-shield strength as well as electrical properties are provided by the proposed technology.

The metallic bond coat is generally utilized to increase the coating adhesion and the adhesion of thermal spray bond coat is of essential importance to applications. However, it usually depends on mechanical bonding with a low adhesive strength. In this study, a novel metal bond coat with high cohesion strength is proposed by plasma-spraying Mo-clad Ni-based or Fe-based spherical powder particles. Mo-cladding ensures the heating of spray particles to a high temperature higher than the melting point of Mo and prevents metal core from oxidation during spraying. Theoretical analysis on the splatsubstrate/ splat interface temperature and experimental examination into coating-substrate interface microstructure were performed to reveal the metallurgical bonding formation mechanism. The local melting of substrate surface and resultant bond coating by impacting high temperature droplets creates metallurgical bonding throughout the interfaces between substrate and bond coat, and within bond coat. The experiments were conducted with different substrates in different surface processing conditions including Ni-based alloy, stainless steel and low carbon steel. All pull-off tests yielded strong adhesion higher than the adhesives strength of 80 MPa. The present results revealed that Mo-clad metal powders can be used as new bond coat materials and high performance bond coat can be deposited by atmospheric plasma spraying.

In this study, Al 2 O 3 -based coatings with varying TiO 2 contents (0, 3, 13, and 40%) were fabricated using atmospheric plasma spraying technique. To compare the superiority of the samples, their thermal properties (thermal conductivity and thermal shock resistance) were characterized. As observed, Al 2 O 3 - 40%TiO 2 (A-40T) coating exhibited relatively superior thermal insulation and thermal shock resistance at 600°C. According to the microstructure and phase analysis, this finding can be attributed to the special phase, Al 2 TiO 5 , and the pre-existing microcracks inside the coating. Thus, A-40T manifested excellent characteristics for thermal insulation application compared with pure Al 2 O 3 and low-TiO 2 content coatings.

Composite coatings using mixed alloy matrices reinforced with carbon-based solid lubricants as feedstock materials were prepared by atmospheric plasma spraying. The aim of the present study was to investigate the tribological characteristics of such coatings exploring potential benefits of CNTs as nano-additive to reduce friction and wear, improving lubrication conditions during operation in tribosystems, such as piston ring – cylinder liner systems. The chemical composition of feedstock materials and the thermal spray parameters during coatings deposition are correlated to friction coefficient and wear rate using pin-on-disk measurements. The developed coatings hybrid behaviour is studied. Co-based cermet as well as metal alloy anti-wear performance along with the promoted lubrication conditions during operation is revealed. The dependence of the developed coatings quality and performance on the characteristics of the feedstock powder is thoroughly discussed.