The paper reports numerical simulation results of a direct current (DC) suspension plasma spray with an axial injection system. In the numerical modelling, a two-way coupled Eulerian-Lagrangian approach was employed to simulate plasma flow and suspension behavior. As effects of two-way interaction, momentum transfer and energy transfer were chosen. The plasma spray was assumed to have a rotationally symmetric, two-dimensional shape around the injection axis of suspensions (the central axis), and therefore the axisymmetric two-dimensional approximation was adopted in the numerical modelling. Working gas was pure argon and was supplied from both the anode-side and the cathode-side ports. A total volume flow rate of the working gas from anode and cathode was set to 46.5 slm. A feed rate of suspension was parametrically set to 0, 15, 25, or 35 g/min. Numerical results indicate that the temperature of a plasma hot-core region and the velocity of a plasma jet around the central axis drop more with increasing feed rate of suspension mainly because of a decrease in Joule heating with increasing it. The numerical results also suggest that the increase in feed rate of suspension leads to practically lengthening flight distance of suspensions required for completing evaporation process of disperse medium.

The development of corrosion resistant sprayed coating without sealing is required to increase reliability of the thermal spray coating method and to expand the field of application for the wet corrosion environments. The conventional wire flame sprayed Al coating on the steel substrate without sealing has poor resistance against aqueous corrosion, so as to be restricted in use in practical fields. A duplex coating composed of sprayed Al on a 80Ni-20Cr alloy undercoat was proven to have sufficient resistance in a hot, near neutral aqueous environment through a trial use in a vegetable oil process. In this paper, mechanism of the corrosion resistance of the duplex coating is clarified by electrochemical measurements of the corrosion potential and the anodic polarization characteristics.

Corrosion behavior of a flame sprayed titanium coating sealed by some resins was investigated in 3.5% NaCl solution by an electrochemical polarization measurement and an immersion test. The composition and structure of the sprayed film was also analyzed by SEM and EPMA. Although an as-sprayed titanium had no resistance to the corrosion because of its porosity, the sprayed titanium sealed with epoxy or silicon resin showed an excellent resistivity against the chloride corrosion. In spite that almost half amount of the titanium changed to oxide, nitride and carbide through the gas flame spraying, the conversion of the metal to the compounds had little effect to decrease the corrosion resistivity. The sprayed and sealed titanium coating obtained by a conventional onsite thermal spraying is expected as an economical material for chloride containing environments.