Key Factors Governing the Deposition of Hard Phases When Cold Spraying Metallic Matrix with Mechanically Mixed Powders Free

Cold spraying mixed metal-ceramic powders creates metallic matrix composites, but typically achieves low hard phase content in deposits. We investigated this challenge using various hard phases (SiC, diamond, WC, W) with Al and Cu metal matrices. Our results reveal that density difference—not hardness—between components primarily determines deposition efficiency. When using Al with similarly dense materials (diamond, SiC), deposit compositions remained comparable despite hardness variations. However, mixing Al with 50 vol.% of WC or W produced deposits containing 57.9 vol.% and 79.8 vol.% hard phases, respectively. Based on these findings, we established a ballistic theory-based criterion for effective hard particle deposition.