Abstract
The polymer cold spray (CS) process has been demonstrated as a promising coating and repair technique for fiber-reinforced polymer composites (FRPs). However, a noticeable variation in coating thickness (herein referred to as checkerboard pattern) often occurs in the initial (bond) layer of low-pressure CS deposition. The checkerboard pattern occurs due to essentially periodic variations in matrix thickness above the subsurface fiber weave pattern. When the bond layer exhibits the so-called checkerboard pattern, the CS deposition for subsequent layers may be negatively affected in terms of deposition efficiency, porosity, adhesion, surface roughness, and surface thickness consistency. The present work compares results of both numerical simulations and experimental studies performed to reveal the governing mechanisms for and elimination of checker-boarding. Numerical single particle impact simulations are conducted to observe various thermomechanical domains for CS impact on the FRP surface in different regions of the composite material. Complementary experimental CS studies of exemplar powders onto FRPs with various surface interlayer thicknesses are also presented. Experimental analyzes of deposits include microstructural observations to compare against the simulations while also providing practical strategies for the elimination of checkerboarding effects.
