Abstract
In particular, eutectic HEAs (EHEAs) are of interest for coating technology. The microstructure of these multiphase systems is determined by the cooling conditions during solidification and the heat treatment condition. High cooling rates can suppress segregation and allow the formation of a supersaturated solid solution microstructure. Therefore, the property profile differs from that of the equilibrium state. The effect of cooling conditions on the functional properties of EHEA coatings has not been investigated so far. In the current study, the microstructure formation and wear resistance of the metastable EHEA Al0.3CoCrFeNiMo0.75 was investigated. Laser metal deposition (LMD) of the inert gas atomized powder forms a directional vertically solidified lamellar structure. A supersaturated solid solution and a metastable BCC and HCP phase was formed. The microstructure resembles a Widmanstätten structure. By spark plasma sintering (SPS), a statistically distributed orientation of the fine lamellae was produced. The highest microhardness and oscillating wear resistance were detected for the ultrafine LMD coating. By increase of the microstructure domain size, the hardness and oscillating wear resistance decrease. This study reveals the great potential of supersaturated solid solutions of ultrafine EHEAs obtained by LMD processing with high cooling rates.
