Influence of Particle Size and Spray Parameters on Formation of Dense Yttria Coatings by Suspension Plasma Spraying Available to Purchase

This study investigates the influence of particle size, nozzle diameter, gas flow rate, and stand-off distance on the microstructure and density of suspension plasma sprayed yttrium-oxide coatings and the intermediate effect of particle characteristics. Three ethanol suspensions were prepared, one with coarse Y₂O₃, one with fine Y₂O₃, and one with submicron YSZ. The suspensions were injected vertically into the plasma jet downstream of the nozzle and a thermal spray sensor was used to measure in-flight velocity and temperature. The coatings were found to have columnar and dense vertically cracked (DVC) microstructure, varying in hardness and density. Text results and examination findings are presented and correlated with spray parameters, particle properties, and possible coating formation mechanisms.