Abstract
This study investigates arc behavior associated with twin-wire arc spraying and the effect of pulsed current power on arc formation and coating properties. It is shown through false color images and by calculations that arc length is directly related to voltage and that a “natural” frequency can be obtained from voltage fluctuations. By applying current pulses at this frequency, arc movement along the wire tips is effectively controlled because the arc reignites with each current pulse. This results in coatings with lower oxide content and a microstructure nearly free of the lamellae typically found in dc arc spray deposits. Further improvements are likely to be achieved by optimizing the configuration of the wire guides relative to the gas nozzle.
