Bronze materials such as Ni-Al-bronze show exceptional performance against corrosion, erosive wear, and cavitation erosion due to their high fatigue strength and resistance to plastic deformation, and are thus used for ship propellers and in turbines, pumps, and other equipment where alternating stresses occur. Usually, the respective parts are cast, but in this study, a number of opportunities are evaluated to apply bronze as a coating to critical part surfaces. Initial experiments with cold gas spraying were promising enough to assess the use of warm spraying, a nitrogen-cooled HVOF process that provides similar particle impact velocities but higher particle temperatures, while still minimizing the effects of oxidation. The formation and performance of warm sprayed Ni-Al-bronze coatings was systematically investigated for different combustion pressures and nitrogen flow rates. Substrate preheating was also used to improve coating adhesion. The coatings obtained show low porosities, high strengths, and in some cases, cavitation resistance similar to that of the bulk material.

This content is only available as a PDF.
You do not currently have access to this content.