Abstract
This paper evaluates and compares five wear-resistant coatings produced by HVOF spraying for high-temperature use. CrC-NiCr, CrC-CoNiCrAlY, Stellite 6, NiCrBSi, and TiMoCN-Ni coatings were sprayed on grit-blasted carbon steel substrates. Abrasive, sliding, and fretting wear resistance were measured and changes in microstructure and hardness due to high-temperature exposure were recorded. CrC-NiCr coatings exhibited the best wear properties, but the oxidation of carbides at high temperatures proved to be a problem. Based on test results, alternative coatings would include CrC-CoNiCrAlY for abrasive wear, Stellite 6 for erosive wear, and NiCrBSi for sliding wear.
This content is only available as a PDF.
Copyright © 2014 DVS Media GmbH. All rights reserved.
2014
DVS Media GmbH
Issue Section:
Steam Power Applications
You do not currently have access to this content.