Calcined spray-dried hydroxyapatite (Ca10(PO4)(OH)6; i.e., HA) powders were atmospherically plasma sprayed (APS) using various process parameters. The resulting phases within the coating surface and the interface between the coating and the substrate were analyzed using X-ray diffraction (XRD) methods. This XRD revealed the presence of both amorphous (i.e., amorphous calcium phosphate: ACP) and crystalline phases. The crystalline phases included both HA and some impurity phases from the decomposition of HA, such as tricalcium phosphate (α-TCP and β-TCP), tetracalcium phosphate (TTCP) and calcium oxide (CaO). The crystallinity of HA decreased with increasing spray power and stand-off distance (SOD). The percentage of all impurity phases increased with the spray power. The percentage of both TCP and TTCP decreased with the SOD while the CaO percentage increased. In addition, the percentage of ACP and CaO were higher in the interface than at the surface of the coating while the percentage of TCP and TTCP exhibited the opposite effect.

This content is only available as a PDF.
You do not currently have access to this content.