Abstract

Lock-in thermography is a nondestructive inspection method based on modulated heat transport in combination with infrared imaging. Measurement times are relatively short, about 3 or 4 minutes, and the method is amenable to inspecting a wide range of large and small parts. This paper describes the basic principle behind the method and its application to different thermal sprayed coatings (e.g., Cr-steel, Al2O3). It explains how the test samples were prepared with artificial defects simulating delaminations, inclusions, and other types of imperfections and how the method performed in each case.

This content is only available as a PDF.
You do not currently have access to this content.