Abstract
Increase of the pressure of air flow from 0.6 to 1.2 MPa provides the growth of its speed from 300 to 600 m/s. The increase of air flow speed reduces the flight time of drop from the arc to the substrate and them against the prepared surface at higher temperatures. Increase of the pressure of air provides reduction the size of drops and oxides between lamellas as well as improves the mechanical characteristics.
This content is only available as a PDF.
Copyright © 2017 DVS Media GmbH. All rights reserved.
2017
DVS Media GmbH
Issue Section:
Poster Session: Arc and Laser Spraying Processes
You do not currently have access to this content.
