Abstract
Critical velocity is an important parameter in cold spraying. It determines the deposition efficiency under a given spray condition. It depends not only on material types, but also particle temperature and oxidation conditions. In this present work, three types of materials including copper, 316L stainless steel, and Monel alloy were used to deposit coatings by cold spraying. The critical velocities of spray materials were determined using a novel measurement method. Oxygen content in three powders was changed by isothermal oxidation at ambient atmosphere. The effect of oxygen content on the critical velocity was examined. It was found that critical velocity was significantly influenced by particle oxidation besides material properties. The critical velocity of Cu particles increased from about 300 m/s to over 610 m/s with a change in oxygen content in the powder. The results suggest that with a severely oxidized powder, critical velocity tends to be dominated by the oxide on the powder rather than material properties.
