Abstract
Hydroxyapatite Composite (HAC) Coatings made by Low Pressure Gas Dynamic Spray (LPGDS) on the grit blasted Ti alloy substrate were studied. The powder feedstock for the HAC coating by LPGDS was prepared by mixing HA powder with Phosphate Glass particles in polyvinyl alcohol, drying and stirring. As-sprayed HAC films on the substrate were heat-treated by two steps (400-500°C and 600-900°C) and their physical characteristics were investigated by scanning electronic microscopy (SEM), X-ray diffractometer (XRD). During sintering-heat treatment, HA particles were consolidated and melted to form a dense and homogeneous coating layer which exhibits the grain structure. Application of HA-glass feedstock is found to be effective for Cold Spray HA based coatings.
