In order to improve gas turbine performance it is possible to decrease back flow gases in the high temperature combustion region of the turbo machine reducing shroud/rotor gap. Thick and porous TBC systems and composite CoNiCrAlY/Al2O3 coatings made by Air Plasma Spray (APS) and composite NiCrAlY/graphite coatings made by Laser Cladding were studied as possible high temperature abradable seal on shroud. Oxidation and thermal fatigue resistance of the coatings were assessed by means of isothermal and cyclic oxidation tests. Tested CoNiCrAlY/Al2O3 and NiCrAlY/graphite coatings after 1000 hours at 1100°C do not show noticeable microstructural modification. The oxidation resistance of new composite coatings satisfied Original Equipment Manufacturer (OEM) specification. Thick and porous TBC systems passed the thermal fatigue test according to the considered OEM procedures. According to the OEM specification for abradable coatings the hardness evaluation suggests that these kinds of coatings must be used with abrasive tipped blades. Thick and porous TBC coating has shown good abradability using tipped blades.

This content is only available as a PDF.
You do not currently have access to this content.